-
See if we are able to flash using openocd instead of st-flash. See BSP/STM32F413/Makefile.
-
I am using STM32F413 which is very often used. But - unfortunately - not in database....
How can it be added to database? STM32H7 is not in database, too
Best regards
DF8OE
df8oe updated
6 years ago
-
**Describe the problem this feature will solve**
Currently, if an OS error/nonrecoverable error happens, we turn off the scheduler and enter an infinite while loop. It's kind of undefined behavior if…
-
Hace falta el crate `cortex-m-semihosting` para poder compilar el ejemplo del blinky.
-
I searched for "FPU" on all svd. These are the inconsistencies I've found.
Let me know if you confirm these inconsistencies or not.
Since this is a long issue, we could do different pull requests …
-
I'm playing around trying rust embedded for the first time using an existing board-stack with an F413 I have which has the UART4 for "debugging" but it seems the formatting infrastructure for this par…
fbstj updated
1 month ago
-
### Feature request
Please add support for STM32F413. @bugobliterator has added support on these two branches but they conflict with branch:pr-chibios-update
https://github.com/bugobliterator/ar…
-
I was running some tests on a nucleo-f429zi with the PLL set as source system clock and with different target frequencies when I found out that the [`pll.enable()`](https://github.com/tock/tock/blob/0…
-
Currently, when using swap-scratch upgrade strategy with encrypted firmware images, the scratch area has to be placed in internal flash memory, even when `BOOT_SWAP_SAVE_ENCTLV` is enabled, since MCUb…
-
https://github.com/supperthomas/rt-thread/actions/runs/5400782999