-
I'm trying to use the ADC on an STM32L476RG. The value is supposed to change, but I keep reading the same-ish values. The clock selection doesn't seem to match the reference manual, so maybe the wrong…
-
Per the reference manual:
Some I/Os from Port G (PG[15:2]) are supplied from a separate supply rail. The power supply for this rail can range from 1.08 V to 3.6 V and is provided externally through t…
-
STM32L476 波特率:921600
循环发送延时1ms 数据量约2KB/s 此时绘图窗流畅度大幅下降。
函数如下;
while (1)
{
printf("%d\n",(uint16_t)TempValue);
HAL_Delay(1);
}
循环发送不延时 数据量约10KB/s 此时绘图窗需手动刷新。
…
-
Hello and thanks for your library.
I tried to adapt it to L476 with the following parameters :
```C
#define _EE_USE_FLASH_PAGE_OR_SECTOR (255)
...
#if defined(STM32L476xx)
#define…
-
I've got an error like below
```
Traceback (most recent call last):
File "/home/mateusz/Documents/___STM32/ParaTNC/STM32L476_ParaMETEO/__stackanalysis/WCS.py", line 430, in
main()
File…
-
Hi,
I've been trying to use TIM1 and TIM8 advanced timers on STM32L476 but there seems to be an issue.
The following example doesn't output anything on PC6:
```rust
#![no_main]
#![no_std]
…
-
Running `cargo run --example otg_fs_serial --features "stm32l476 otg_fs rt"` and then running
`lsusb | grep 16 `
yields no results.
-
I'm creating an app. for stm32f429 discovery.
Here is my code:
https://github.com/gnitnaw/f9-kernel/blob/master/user/apps/led/main.c
I would like to ask how to write the part "DECLARE_USER" and "…
-
Has a "standard way" developed to share the files on an MCU's LittleFS with a PC (Through USB or UART)?
Wishful Application:
- MCU to have SpiFLASH with LittleFS.
- PC connects to MCU (USB CDC us…
-
The STM32L476 has 5 endpoints both in and out, up from 3 in the F107
It also has 6 TX-IN fifos, up from 4; and more scheduler requests for host mode.
USB_fx107_common appears to have the right archi…