-
我是中国人
use 1 master for 8 slave
1 slave disconneted ,and master connect the disconnect slave ,but aci_gap_create_connection return 0x86 ,
Is it because resources are not released?
-
You mention the STM32F3 series chip in the readme. Is the STM32WB a reasonable replacement with Bluetooth support? It looks like the pin out is reasonably similar and they both use the Cortex-M4F CPU …
-
**Describe the bug**
I'm migrating my project to Zephyr and tried to reach the same level of Power consumption as in the original project using only HAL and FREERTOS. In my original project I could s…
-
It would be good to have a checklist in the source file of every example, to ensure people trying to use examples for different chips/boards know what they need to do. This is a VERY common question i…
-
```
stm32wb-hal = { version = "0.1.2", default-features = false, features = ["xG-package", "rt"]}
```
compiles, but
```
stm32wb-hal = { version = "0.1.2", default-features = false, features =…
-
Hi,
I encountered an unexpected behaviour while using BLE on my STM32WB (NUCLEO-WB55).
When trying to scan while advertising, an OSError is raised.
I tested the behaviour by running a little …
-
I think a modification at some eons damaged few SPI drivers, there are references to CONFIG_SPI_DMAPRIO but without any definition of it.
I didn't investigate further, but probably some boards coul…
-
**Describe the bug**
When trying the bluetooth examples for STM32WB55RG on two different nucleo_wb55rg boards, I noticed that the MAC address was the same for both:
EDIT: I found this "bug" when t…
-
**Is your enhancement proposal related to a problem? Please describe.**
Extended advertising support on STM32WB requires the use of a specific BLE controler f/w on M0 side.
It also requires some spe…
-
Where are the `VendorStatus` codes coming from. There are a handful of codes that don't match anything that I can find. For example, `VendorStatus::InvalidParameters` is defined as `0x42`. But based o…