-
I've tried to use the stm8flash.exe from the 0.5 release as standalone program from the command line on Windows 10 with an STM8AF board (which has an integrated stlinkv2).
But I get an error (doesn…
-
Attached is a document that attempts to put the Read-out Protection (ROP) option byte information for all STM8 devices in one place.
The mechanism to disable ROP varies between STM8 types, and some…
-
**Caution**
The Issues are strictly limited for the reporting of problem encountered with the software provided in this project.
For any other problem related to the STM32 product, the performance…
-
-
Even added a decoupling cap to NRST but forgot to add a pull up resistor.
-
The `bsl_getInfo()` function in bootloader.c attempts to determine memory size of the device by reading from the last byte of flash. I notice that it does not have a case for 64K devices. I believe th…
-
On the RCM2200, which has a Rabbit 2000@22 MHz, I see 2755 Dhrystones/s using the example code with current SDCC.
For comparison, current SDCC gets about 6000 Dhrystones/s on a C8051@96 MHz, and ov…
-
STM8: http://www.st.com/web/en/catalog/mmc/FM141/SC1244
It may be yet another MCU family that is "inaccessible" from Linux or Mac OS X :(
Fortunately, STM8 shares ST-LINK with STM32. So I guess some…
-
`$ ./stm8flash -c stlinkv2 -p stm8af528? -s flash2 -w ./myprog.hex`
`Determine RAM area`
`Due to its file extension (or lack thereof), "./myprog.hex" is considered as INTEL HEX format!`
`Address 80…
-
According to ST documentation, on the STM8AF, the bootloader can be accessed via LINUART, too.
Philipp