-
Hello thanks for this great library first off. I have noticed that Subnet/LAN Scanner is not showing all the devices. I think this is happening because when it pings the IPs with NATIVE ping some type…
-
The ONVIF scanner looks at a 255.255.255.0 mask on the ip where the server (rokuphp) is running. I have cameras on VLANs and different subnets. It would be useful to be able to define the subnets wher…
-
**Describe your issue**:
I'm using Win11 with msi to install NWM directly, and using the IP scanner to scan the APIPA address with the subnet mask attached causes the program to crash.
我使用Win11用ms…
AHLLX updated
2 months ago
-
When I scan a local subnet I see the same MAC vendor and address on all IP addresses. It appears to be the MAC of the network switch itself. My machine is on the same subnet.
I have used Angry IP …
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Community Note
* Please vote on this issue by adding a :thumbsup: [reaction](https://blog.github.com…
-
On a test system done from a mix of branches from different NUT PRs, I noticed that running `nut-scanner` did not produce any results, while it was expected to find some netxml and snmp devices, and m…
-
Hello,
When I use automatic scan and update ping scanner on my subnet, i can't update with result of scan.
-
if use this cmd
scanner 192.168.1.1/32 -t 2
will return error
Traceback (most recent call last):
for ip in iplist:
TypeError: 'NoneType' object is not iterable
in line 321
if subnet == 32:
pr…
-
Besides the MITM module, the subnet target could have enabled the Port scanner and the Service inspector modules.
I've taken a look at it, and the native library should return the target IP besides t…
-
```
What steps will reproduce the problem?
1. Change IP's from Standard 192.168.x.x to 172.16.x.x, 10.x.x.x or another
Private IP range
2. Clients connect under new IP's, but don't show in list
3.…