-
Kindly consider adding support for TTGO T-Beam v1.2 with SX1276 for 915 MHz.
I was able to get it working with the following diffs.
platformio.ini had sections for TTGO_T_Beam_V1_2 and TTGO_T_Beam_V…
-
I bought two LoRa nodes from Lilygo, the SX1262-433MHz and SX1262-915MHz. In my actual tests, at all BW&SF combinations (I tested SF6 to SF12, BW from 125kHz to 500kHz), the actual communication dista…
-
HI,
Could you please highlight for me how I could use this driver on my FRDM KL03z board?
I will really really really appreciate it
Thank you so so much
-
I wanted to use the library in a project but when when the library sx1262 is imported this error happens:
```
Traceback (most recent call last):
File "", line 1, in
File "/lib/sx1262.py", lin…
-
I built two lora system with below configuration.
1. NodeMCU+ SX1262
2. Pico W + SX1262
Now, I want integrated with ESPHome with External Components.
To start with I want to first send yo…
-
After creating this issue
https://github.com/PaulSchulz/esphome-lora-sx126x/issues/1
I build new hardware with ESP32 and SX1262(Waveshare) module, but it is not working
Previously I am using th…
-
had to change to tcxoVoltage=0 because the example code one just fails to run
Send
````from sx1262 import SX1262
import time
sx = SX1262(spi_bus=1, clk=14, mosi=15, miso=24, cs=13, ir…
nwgat updated
1 month ago
-
Hello. Your project helped me a lot, I continue to experiment with it, and these are the only nodes for hundreds of kilometers. I want to try the Semtech SX1262 and the E22-900M30S seems to be a good …
-
Are there plans to update this example for the SX1262 when it gets supported by the rest of mbed os?
-
I could need some help with LoRa communication between an T-Beam SoftRF SX1626 and a T-Beam Mashtastic. I tried to use the transmitter and receiver code from:
https://github.com/Xinyuan-LilyGO/LilyGo…