-
Hi there
What a cool project.
Do you know whether this will work with the LoRA T-Beam boards?
Thanks
Michael GM5AUG
-
Kindly consider adding support for TTGO T-Beam v1.2 with SX1276 for 915 MHz.
I was able to get it working with the following diffs.
platformio.ini had sections for TTGO_T_Beam_V1_2 and TTGO_T_Beam_V…
-
Hi,
in your repos I noticed that you are working on a TTN/Helium-mapper for the T-Beam 1.2 with AXP2102 power management, [https://github.com/designer2k2/tbeam-lorawan-mapper]. Is there a chance tha…
-
https://meshtastic.org/docs/hardware/devices/tbeam/buttons/
Ref https://github.com/meshtastic/firmware/issues/3550
The description of the buttons seems wrong. I'm still figuring it out, but **t…
-
### Category
BLE
### Hardware
T-Beam S3
### Firmware Version
2.3.11
### Description
Unable to import the configuration file, it always restarts too quickly, before the task is com…
-
Where we don't have common beams, or circular beams, we agreed to convolve to a common circular beam of 9 x 9 arcsec.
We can use off the shelf solutions for this. Will test https://github.com/landm…
-
### Category
Hardware Compatibility
### Hardware
T-Beam S3
### Firmware Version
2.3.12
### Description
Using t-beam S3 supreme, using using USB power supply.
In the list of nodes, 0% 0.00V is…
-
I have 2 x Tbeam with Meshtastic firmware installed and trying to get data from an SRR dongle using the UART interface but I cannot get something readable. Will this work with a T-Beam Meshtastic dev…
-
### Category
BLE
### Hardware
T-Beam, Hydra
### Firmware Version
2.3.12
### Description
Used `--reboot-ota` and "Send Reboot OTA" button in iOS. Device reboots into OTA mode (per …
-
Hello,
I am trying to use LoRaMesher with a t-beam-supreme-s3 and am encountering some difficulties.
I am trying to use the counter example.
The board uses sx1262.
Here is the code I am using:
…