-
Would it be possible to add fleetsync radio ID under add identifier?
-
On the older MMDVM_Host some time before 2018 ( Sorry I don't have a version ), when a user radio keys on P25 Talk group 1, the system does not unlink and stays in it's current state. This was useful …
-
Keep getting this invalid password, any ideas?
jon@minipc:~/tr_configurator$ sudo ./main.py -u ..... -p ..... -s 11956:40694,40695,40696,40697,40698,40699 --talkgroups -o /tags
___ ____ _ _ _ …
-
Currently, `trunk-recorder` (as well as OpenMHz) tries to operate on the common ground of talkgroups being in decimal and ignores hexadecimal talkgroup values. This isn't a poor choice, since it is my…
-
**sdrtrunk Version**
Nightly Version (Downloaded on 8/30/24)
**Describe the bug**
I am using sdrtrunk to stream to Rdio-Scanner and on the Harris-built Miami P25 system [https://www.radioreferenc…
-
If a DMR-ID was used on a simplex-hotspot with a specific set of Talkgroups and this ID is switched over to a duplex-hotspot, the admin-pane on the dashboards show all TGs connected to the ID - mixed …
dg9vh updated
6 years ago
-
If names are the same, then re-importing contacts will not corrupt channels and RX groups in your codeplug. If they differ, you will have to go back into each corrupted channel or RX group and fix it.…
ajorg updated
8 years ago
-
I'm using sdrtrunk alpha 6 on a windows pc. Everything is working great except I'm getting some dispatch tone outs coming up as the incorrect talkgroup. It's only on the initial tone out, all other tr…
-
Hi,
I think this would be useful for all...
The name display on the web interface and the CL interface displays the Talkgroup name only when the TG is actively transmitting. A lot of times this is …
-
Add ability to hold on a specific talkgroup.
When monitoring a system and a specific talkgroup is active, add ability to hold (only listen to) that specific talkgroup, until the hold is removed.