-
### Zig Version
0.14.0-dev.1632+d83a3f174
### Steps to Reproduce and Observed Behavior
Minimal case to repro:
* `build.zig.zon`
```zig
.{
.name = "tmp.CsP3FWngBQ",
.ver…
-
Hi Folks, I would like to know how to target the STM32F405RG6 or other MCU . Is there a guide to do this ? or is it assumed knowledge? I've no been able to find the details in the documentation.
…
-
Hi,
I am currently working onto a custom ATmega2560 based board. On one of my prototype, when programming the fuse for the first time, a short-cut should have wrongly programmed the SPIEN... So I need…
-
### What happened?
Hi
just a question, not bug.
I know can build an AI model target cpu, finally it have two part: host(cpu) and device(such as X86). if my device is MCU(single core), can iree …
-
We should safeguard against people accidentally flashing a binary for a different MCU.
User report: https://github.com/Rahix/avr-hal/discussions/530
Rahix updated
6 months ago
-
After I replaced the MCU in my K5 and flashed the Quansheng bootloader and firmware, I found that the screen displayed stripes upon startup and the device became unusable. I am quite puzzled by this…
-
I saw that the embedded code can potentially change the endianess if needed before send data.
```c
//! TRICE_HTOTS reorders short values from host order into trice transfer order.
#define TRICE…
-
### K-Shake&Tune module branch
- [X] I confirm using the main branch
### Version
v4.0.1-0-g69ad2283
### Describe the bug and expected behavior
i belive problem appeared after first ax…
-
**Describe the bug**
Build error occurs on both Arduino IDE and Platformio
Additionally, it happens with both versions 2.3.3 and 2.3.4.
**Describe the hardware setup**
- Which microcontroller
…
-
Hi there, as I can see current riscv profile is mainly for application processor, and there is not yet a profile targeting at mcu market, maybe a mcu profile could be set, for mcu, interrupt should be…