-
So far I've tried the following combinations:
RPI3 with Rak starter kit (serial connection)
- It only stays alive for approximately 40 minutes then the server cannot read traffic from the radio…
-
Hi,
in your repos I noticed that you are working on a TTN/Helium-mapper for the T-Beam 1.2 with AXP2102 power management, [https://github.com/designer2k2/tbeam-lorawan-mapper]. Is there a chance tha…
-
Quite all in the title : T-Beam V1.1 433MHz Doesn'twork as T-beam but as TTGOv2
Using uploader, work fine until Wifi link
As T-Beam :
The T-beam is unable to link the Wifi network and ask to get b…
fr4sw updated
1 month ago
-
https://meshtastic.org/docs/hardware/devices/tbeam/buttons/
Ref https://github.com/meshtastic/firmware/issues/3550
The description of the buttons seems wrong. I'm still figuring it out, but **t…
-
I have 2 x Tbeam with Meshtastic firmware installed and trying to get data from an SRR dongle using the UART interface but I cannot get something readable. Will this work with a T-Beam Meshtastic dev…
-
I am trying to complie for TBEAM v10 with FANET option, but it won't compile. First issue is at rf.ccp:465, there is a typo brek; instead of break; That's an easy fix, but after still this complilatio…
-
Hello,
I have a TBeam-AXP2101-V1.2 and unfortunately, the current AXP implementation doesn't work. (Indeed, AXP2101 is NOT AXP192).
I have found library XPowersLib (https://github.com/lewisxhe/XPo…
-
As soon as you remove the battery and put it back in, the TBeam no longer boots. The same also happens if the battery is empty and you don't charge it during operation.
You then have to flash the e…
-
I downloaded the app and flashed the RippleV5-Bluetooth-TBeam.bin on a T-beam as I believed it is for using a t-beam as a home unit. Unfortunately I cannot get it to work. Do I have to buy a TTGO LoRa…
-
Seems newer T-BEAM boards (sometimes calls V1.2 but mine's marked V1.1) have a new PMU chip, APX2102 instead of APX192.
The symptoms are that transmission never starts, it's as if the transmitter i…