-
the field is not being used
-
How can you set the temperature?
I can read the sensors you created but how can i set the temperature or enable/disable the light?
-
Hi,
I'm modifying BMex 0.4.9 to suit my hardware. It seems to work, but the temperature display is not updated. The initial reading is there, but when I warm up the sensor, nothing happens.
When I t…
-
Hello, i want use the temperature sensor from my Hygrometer. Is it possible to choose another Sensor?
-
**Describe the bug**
I get a KeyError related to line 262 in coordinator.py, when it tries to read temperatures from the JSON response from /api/Panel/GetTemperatures.
As far as I have been able t…
-
**Describe the bug**
Maybe its me, but with the enabling XY color mode on or off (it should be on for those Ikea E27 CWS opal 600lm) the temprature of the lights is not controllable when they are add…
-
HI
Hope someone can help
I have just got a SEEED Xiao ESP32S3 sense board + Camera
https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html
When i try to compile this i get the following e…
-
Lee discovered that placing a cell phone near the cable connecting the controller and heater causes the measured temperature to be in error.
![image](https://github.com/PubInv/moonrat/assets/58…
-
Using RAPL
-
hello, I try to use bestest_air to do a control test. I find that the "con_oveTSetCoo_u"(Zone temperature setpoint for cooling
) is from 296.15K to 303.15K. It seems that this zone temperature setpoi…