-
tension (maybe kilter too?) uses different colors for led and screen. they are marked in the database.
right now it seems that the screen colors are used for the leds and this messes up the colors. …
-
Hello,
I have tried the THC ADC plugin from Phil Barrett. I had the web builder built the firmware accordingly and flashed it to my Teensy.
I then made a few tests, just with a potentiometer instea…
-
Salut,
Si j'achète la Board ESP-32 E-Ink: T5 V2.3.1, ça sera suffisant ? le module wifi est intégré ? quid de l'alimentation ? il faut prévoir une batterie ?
-
### Software
- Window too large and doesn't fit inside screen on my laptop
- Tension table and graph cut out on my laptop
- Accommodate python2.7 used for winder software on same computer (probab…
-
I thought that a higher "Tension" in automation curve should make it look more like linear progression, while a lower tension should allow a smoother transition between control points. Secondly, I exp…
-
Current corner servo-to-board connection uses 2.54mm pitch DuPont connectors, which provide no mechanical connection/locking aside from friction and the spring tension of the female connector. The use…
-
Voron 2.4 r1
350mm
z belts = LL-2GT RF
Literally not possible to get them to the recommended ~7.05mm deflection.
Stuck at ~5.8
How can we determine these numbers to create our own belt char…
-
```
The SMD Slide Switch used (sparkfun SKU COM-08769) seems to be proving
unreliable. The top cover may come off after repeated use and the switch
falls apart due to lack of tension on the top cover…
-
A big (first world problem) we have when climbing with a bunch of friends on our kilter, is that only 1 person knows what problem is currently on the board. It would be super sick if we could create a…
-
### The problem
Hi,
i m not 100% sure its the only case where the hostname doesnt follow the esphome "name" directive in the config file.
i have the same behavior if i force the .lan or leave the…