-
Currently, the config file at /etc/nut/upsd.conf just contains the one line "LISTEN 0.0.0.0", which makes the UPS service only listen on legacy IPv4.
I am running NUT 2.8.2. It looks like NUT 2.8.1…
-
Look at this... 👀 https://pin.it/48ywERBc0
-
**Question**
Which ESP32 board will run this project without any changes?
**Additional context**
I have an XIAO ESP32 C3 in my drawer, but I am not sure if it will need tinkering to make it work.…
-
Flows don't feel quite right; e.g.:
* Auto Update doesn't quite work (had a 0.1 app installed, autoupdating that didn't fetch 0.2. Even after trying to download & install it, it still didn't work. I …
-
Please guide me away from accuracy detrimental fiddling of settings, but also help me understand how to evaluate settings changes. I have read the settings change description in the editor, however I…
-
Mess around with higher `air_accel_y` (gravity) and `air_speed_y_stable` (max fallspeed) values for most characters to try and relieve some of the 'floatiness' present in the game rn
-
Hi, wonderful tool....i have been tinkering and playing around it with in my own time for a while now. I have noticed that these old dlinks run busybox whic is extremely restricted, so how would one e…
-
# The unofficial yet comprehensive FAQ for LoongArch (last updated 2022-03-06) | write(2)
Things you probably should know about the LoongArch, compiled and written by an independent developer.
Transl…
-
# Tinkering With SpacetimeDB - mikecann.co.uk
BattleTabs
[https://mikecann.co.uk/posts/tinkering-with-spacetime-db](https://mikecann.co.uk/posts/tinkering-with-spacetime-db)
-
I was hoping to get a working version of MeshCentral in the catalog. There was a version under truecharts but I did not get it installed before they killed off that catalog. I've tried tinkering with …