-
-
Currently, the project appears to consume a [forked version](https://github.com/4m1g0/IotWebConf2) of the [IotWebConf library](https://github.com/prampec/IotWebConf). This is slightly out-of-step with…
-
Would it be possible to add TinyG Support?
-
Hi I'm using a Pi3 and and Tiny G#
Im greeted by this black screen with this black screen? what am i doing wrong.
![2018-06-01-182732_1280x720_scrot](https://user-images.githubusercontent.com/3…
Seb66 updated
6 years ago
-
As a new to TinyGs, im seeing that not an implementation has been made through this device.
My question is, would a TinyGS implementation adds coverage to a terrestrial application when not TTN/Loraw…
-
Hello, I have a big project where the motors are used to move the arms of goniospectrophotometer. And as I understood WPF causes some thread related problems, because TinyG driver, which is in C++ is …
-
I observed this first, I believe, on build 2876, continues on 2944, 2945 and 3009.
When TinyG is reset, either manually or by command from TinyG command line, tgFX toggles from connected to disconnect…
-
## Feature request
I've just got a TinyG board and hooked it up to UGS nightly. There where some basic stuff that's not working at the moment, like the initialization of the controller. This means th…
-
If there is an invalid firmware loaded into TinyG (or NO firmware) clicking connect just causes TinyG to hang. We need to set a timeout on connection and issue an error message if this occurs.
This …
ril3y updated
10 years ago
-
Hi I installed tinyGS to my Heltec lora32 v3 board sx1262 lora radio but with 868MHz
I configuration there is no option for 868MHz only 433MHz
![Screenshot_20240415-122906](https://github.com/G4lile…