-
Hi Charles,
I'm not sure about the value 64 used to switch from Stealth2 mode to SpreadCycle one
`m_tmc5160->TPWMTHRS(64);`
Let's assume 300 worm teeth and 4:1 reduction ratio.
16MHz?
…
-
@cakeslob
Any update on your effort to support the 5160s (and more models)?
I see you reverted your initial commit: https://github.com/scottalford75/Remora/commit/1d37aded962142a7bbc77539eca128c…
-
Hardware:
SKR2 + TMC5160 v1.2 + 24V power supply (17.5A)
Software:
Marlin v2.1.2.1
Issue:
Stepper motors are noisy/vibrate at low, medium and high speeds (30mm/s, 60mm/s, 80mm/s, 120mm/s) whe…
-
I would like to add support for TMC5160 which uses SPI but not sure where to start?
Do I add a new file call tmc_spi.c and include the two functions:
tmc_spi_write() and tmc_spi_read() ?
-
Hello,
I am trying to make the TMC5160 vom BTT to work.
I am having the v1.2 and 1.3v of these stepper drivers.
Both do not have any solder pads or jumpers to change their used mode (as far as I …
-
Hello there,
currently I am working on a Arduino project, with an arduino and a TMC5160 Stepper Driver.
The goal of this projcet is, to let a Nema 23 Stepper turn in both directions. Easy as that…
-
I cannot complete any of the examples, except for the ones that do not include any parts:
```
l_code$ python esp32_motor-pcb-x3_final.py
Circuit: Parts: 17 Nets: 36
Traceback (most recent call…
ghost updated
5 months ago
-
Hello, I have "Global scaler" communication problems with various brands of TMC5160 drivers. In the examples, there are some pins in the table, there are others. I have tried several combinations and …
-
kindly release documments for TMC5160-v1.2. My drives just stopped working.
-
### Is your feature request related to a problem? Please describe.
No
### Are you looking for hardware support?
I made a custom electronics with stm32 f4 chip , so its compatible with marlin
### D…