-
### Version
probably any
### Behavior
The tool starts print first object at right back, OK, prints from back to front.
The next object is again startet at back, so the tool must do long travel f…
ochm updated
4 months ago
-
I want to make groove with the Parallel path. But it always is narrower after CNC than it is in Blender. I tried different options.
![изображение](https://github.com/vilemduha/blendercam/assets/61791…
-
Ie: perimeters.
I asked about it here without much luck for an explicit solution, though there are some pointers:
https://stackoverflow.com/questions/78359671/algorithm-for-insetting-boundary-edge…
-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…
-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…
-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…
-
I will just leave this here as a sign of wishful thinking :-)
https://knowledge.autodesk.com/support/inventor-cam/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/INVCAM/files/GUID-970298C7-2F2E-47E…
-
Hello,
i noticed that this tool contains a feature for doing spiral toolpath.
questions:
- is it for 3d printing or machining ? Or both ?
- Is it continuous (connected) spiral Fermat algorithm …
-
Hello Freddie,
thank you for your wonderful work.
I cannot find how to run this part of the conformal slicer (see attached picture).
Can you help me please ?
Walter
![toolpath_generation](http…
-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…