-
I'm using a custom board with STM32H723 (144pin), 5inch display (LTDC), external SRAM (FMC), external NOR flash (OSPI) with Touchgfx and DMA2D (double buffer strategy). No OS.
I experimented **rand…
-
Heyo!
I have created a project that uses TouchGFX functionality for a Display, running on a STM32H745-Discovery board.
Modbus TCP Slave works just fine and can run simultaniously with the TouchG…
-
@Aladdin-Wang
我是用RTT STDIO,按照你的教程bsp是1.1.0,都是用最新的包。使用的LED的模板
屏幕用的是原子800*480同配置的,触摸芯片也是9147.
显示可以显示图,但是不能动,不能数模,图里面没有曲线。
如附录文件所示;
![IMG_20201202_204728](https://user-images.githubuserconten…
-
The MX25L6433F SPI Flash is used on the [X-NUCLEO-GFX01M1](https://www.st.com/en/evaluation-tools/x-nucleo-gfx01m1.html) board. The use of the [TouchGFX](https://support.touchgfx.com/docs/development/…
-
Hello,
I'm trying to build and flash stm32-projects, including touchGFX.
I can build any stm32-project created as makefile-project from cubeMX, but when adding touchGFX it gives error with undefin…
-
Designing the screen for display of incoming data unmarshalled from the VehicleInfo CAN message type via TouchGFX 4.17 environment:
- Interfacing with STM TouchGFX 4.17 environment
- Setting up re…
-
as touchgfx won't offer graph i come at your page but not able to add graph in my code. how to do this?. till now i am able to use other widget of gfx and able to successfully build it in discoboard
-
-
To whom it may concern,
I have fixed the broken position reporting when in text mode. This has been forgotten when the additional axes were added. Below is a diff against the edge branch:
```dif…
-
Is this repo alive? It seems like the project has bee abandoned :/