-
# Vendor
Unknown
# Invoice Number
Unknown
# Ordered On
Unknown
# Manufacturer
TrippLite
# Model
SMART1000RM1U
# Serial Number
2106JY0SM618600389
-
I purchased a Tripplite SMART500RT1U which NUT HCL shows as supported. I am running TrueNAS Core 12.0-U1 which has NUT functionality. The UPS identifies immediately when plugged in with USB, driver …
-
First time posting, I did not see any current issues reporting this when I searched.
Missing output voltage and output power:
````
# Device dump generated by ./nut-ddl-dump.sh on Wed, 28 Dec …
-
Just downloaded the docker container on CentOS 8. When I plug in my UPS, it gets assigned to "/dev/bus/usb/00x/00x". When I use the docker run command I use:
`docker run --name tripplite --detach…
-
I've got a Tripp-Lite SmartLCD to provide power to my rack and desk, got the CGI scripts served up on a raspberry pi and noticed in upsstats.cgi that output voltage was 1162.0v instead of 116.2v.
I…
Aerol updated
3 weeks ago
-
I have a couple of SMX500RT1U UPS's which use the 3005 protocol and the driver gives a couple of "debug arrays" with values, but the implementation of the 3005 protocol isn't that great at the moment.…
-
as per report in #171, a dedicated Tripplite MIB exists, beside from the IETF data.
This should be added once @bkcsfi has sent the results back
-
Sorry, not sure if this project is still maintained, maybe you could just give me some pointers and I could patch it. I'm running into this error pretty frequently which requires a restart to mitigate…
-
I am running 2.7.4 using the snmp-ups. The value reported by ups.load is 10 times higher than the actual amount. Currently it is showing 160% when it is actually only 16%
Tripp-Lite SNMPWEBCARD run…
-
The SMART1000RMXL2U has 2 switchable outlet banks which I'm trying to add support for in the `tripplite-hid` driver.
Sniffing the wire for the HID Reports sent from the TrippLite PowerAlert software,…