-
### The problem
Had an issue with HA Hive Integration, after a reload I noticed it was showing "No devices or entities"
So removed the integration and attempted to re-add, logged into my Hive accoun…
-
First of all: thanks for putting in the effort, I'm following this with great interest. I would like to see if I can implement this in my case:
- OpenTherm Boiler (Nefit ProLine NxT HRC24)
- OpenT…
-
## The problem
None of the TRV (Thermostatic Radiator Valve) is found.
There are 7 TRV in the same network with other devices like Smart Plug, AC, power meters. All other are found and listed except…
-
### What happened?
Apparently firmware 1.1.5 makes Better-Thermostat custom add-on from HACS unusable.
Everytime you try to set temperature or anything else from HA to the TRV, the TRV goes into O…
-
### Prerequisites
* [ ] Model name of your Devices
BRT-100-TRV
* [ ] Output from Home Assistant Developer Tools state e.g.
```
hvac_modes:
- heat
- "off"
min_temp: 5
max_temp: 35
targe…
-
### The problem
After update to 2024.8 it is no longer possible to send temp outside value 7-35 to my Z-wave Danfoss (Popp) TRV.
Popp Wireless Thermostatic Valve TRV | 010101
The TRV does support…
-
### Prerequisites
* [X] Sonoff TRVZB Valve
* [X] Output from Home Assistant Developer Tools state (for the TRV in itself):
```
hvac_modes: off, auto, heat
min_temp: 4
max_temp: 35
target_…
-
more-info entity does not show when tap_action is more-info for the main entity. Instead, it shows the main entity
>
- entity: sensor.lr_trv_position
…
-
### Link
https://www.xanlite.com/fr/regulation-denergie/1779-product-3700619438993.html
### Database entry
{"id":8,"type":"EndDevice","ieeeAddr":"0xa4c138c3459a0a60","nwkAddr":21209,"manufId":4417,…
-
**Device normal info**
- WiFi Smart TRV-607
- Model
**Device info
{
"active_time": 1682536071,
"biz_type": 0,
"category": "wk",
"create_time": 1682536071,
"i…