-
**Describe error.**
My TS80 is stuck at 5V using build 2.20. It will report 9V immediately after being plugged in, but after 1 second to 5 minutes it will drop to 5v and get stuck there.
**For rep…
-
g++ -std=c++11 -I.. -isystem /ceph/sz_ts80_new/fyz/kaldi/tools/openfst-1.6.7/include -O1 -Wno-sign-compare -Wall -Wno-sign-compare -Wno-unused-local-typedefs -Wno-deprecated-declarations -Winit-self -…
-
**Is your feature request related to a problem? Please describe.**
TS100 going into thermal runaway constantly while soldering with low voltage power sources i.e. 3s LiPo. This makes soldering in the…
-
### ERROR message
[ 85%] Linking CUDA device code CMakeFiles/fl-libraries.dir/cmake_device_link.o
nvcc fatal : Unknown option '-fopenmp'
### installation log
running install
running bdist_egg…
-
**Support for Sequre S60**
im not sure if it is possible or not to support IronOS on the Sequre S60.
I recently added this soldering pencil to my bench as a companion to a TS80.
The S60 is sh…
-
Soo..... This code should now be into the territory of testable.
I've tested on 3x TS100's so far.
To test still:
- TS80
- TS80P
- MHP30
If anyone out there wants to give it a shot to just…
Ralim updated
11 months ago
-
Hello, I have the ts80 and after version 2.10 it is getting stuck on 5 volts although I have it on 9v or 12v. To unstuck it, I have to pull the USB off the power source. Sometimes it is stuck on 5v tw…
-
I happens to buy a ts100 with broken firmware, after connecting it to pc it wasn't able to install driver, like the data lines was broken (they're not). So after some research i bought a St-link v2, b…
-
Creating an issue to track the upcoming TS80P.
So anything said here is speculation at the moment 😁
My current understanding I have pieced together is that it is possible to just add support …
Ralim updated
2 years ago
-
**Describe the bug**
At first start or after reset my device complains that it can not find a motion sensor. The temp calibration is not done after startet in menu.
**To Reproduce**
Reset dev…