-
**Describe the problem you have/What new integration you would like**
Add support for the new LILYGO® TTGO T-SIM7000G with GPS / GSM module SIM7000G
**Please describe your use case for this i…
-
anyone has try to make this code work with the LILYGO® TTGO T-SIM7000G Module ESP32-WROVER-B board?
https://www.aliexpress.com/item/1005001625046691.html?spm=a2g0o.cart.0.0.456e3c00qx7Cgj&mp=1
-
I have been trying for days to reduce the power consumption of the SIM7600 module while keeping it registered to the network. It is the following scenario:
0. ESP32 provisions GPIO 32 (DTR) as an R…
-
Hi. I am working on the code and unable to figure out my ESP32 device id. Is it a MAC address of ESP32? Could you please guide me to find the ESP32 Unique device Id for Traccar server?
-
**Describe the problem you have/What new integration you would like**
I'd like to add a mobile data connection to my ESPHome. For example:
* M5Stack COM.NB-IoT Modul SIM7020G
* M5Stack CO…
tobru updated
9 months ago
-
I have had 3 boards die ( technically 4 but that was my bad, connected battery backward and poof it dead )
I am using an external battery back 3s3p 18650s that output ~11.1v, this is inputted into a…
-
[ x] I have read the Troubleshooting section of the ReadMe
## What type of issues is this?
[ x] Bug or issue with library functionality (ie, sending data over TCP/IP)
[ x] Question or request f…
-
I have 3 sim7000g modems that all show the exact same IMEI when calling for it in the firmware. The physical modem sticker is unique on each modem but firmware all show the same IMEI. I have not yet a…
-
Implement peek() like this
int peek() override {
return (uint8_t)rx.peek();//add to TinyGsmFifo.h
}
TinyGsmFifo.h
uint8_t peek(){
return _b[_r];
}
-
How could i read battery voltage from the battery that could be connected on the board?