-
Documentation in the en/LilyGo_LoRa_Series_Quick_Start_On_TTN.md file specifies there is a TTN example in the /LilyGo-LoRa-Series/examples/TTN/TTN_OTTA folder but it looks like its been removed.
is…
-
Implement the abstract functions from `StructuredState` not yet supported by `TTN`. These are `measure`, `sample`, `postselect` and `add_qubit`.
-
Hello,
Is there any encoder for TTN v3 available ?
Thanks And Regards,
Rupak Banerjee.
-
$ sudo /opt/ttn-gateway/bin/start.sh
/opt/ttn-gateway/bin/start.sh: line 5: echo: write error: Invalid argument
/opt/ttn-gateway/bin/start.sh: line 6: /sys/class/gpio/gpio25/direction: No such fil…
-
I updated the lorix one lorawan gateway for the things network and we can redeploy it on flughafen core.
We need a spare network port with 24V PoE and static or dynamic IP address. I can do the con…
-
Hi,
Really glad to have stumbled on your libraries, the Heltec boards have not been the easiest to work with.
Would you please create an example that would connect to networks beyond The Things …
-
Appears the upstream gateway is down or other issues:
```
>> http https://dev.disk91.com/fieldtester/ttn/v3
HTTP/1.1 502 Bad Gateway
Connection: keep-alive
Content-Length: 166
Content-Type: …
-
**We see that for FP8 GEMM only TNN is supported in the cutlass_prolifer generated kernels and in the examples directory cutlass as well. Are there any fp8 kernel with other layouts like TTT/TTN shipp…
-
please find below an example which sends something to TTN. Power consumption is 19uA.
```
/*
* Example: Send battery voltage to TTN
* tested with HELTEC WiFi LoRa 32(V3):
* power consumpt…
-
### The problem
The sensors provided by this integration cannot be adjusted in the UI and are therfore incorrectly displayed.
I would like to change the unit of measurent of these sensor (e.g. temp…