-
Does this project support 3G UMTS or only GSM?
-
```
What steps will reproduce the problem?
1. Log cells for a while
2. Go to cell overview and analyse UMTS measurements
What is the expected output? What do you see instead?
At least PSC should be a…
-
@FlUxIuS,
I didn't know how to write the problem through a fork, how do you like idea of creating a new OpenBTS-UMTS repository as a continuation of its development and modification, the goal is to r…
-
This only show's CSQ on UMTS mode.
But the uqmi show dBm level
![Screenshot_202…
-
UMTS is default in Jekyll. Perhaps display times as UMTS and add a separate (second) field for local time. Useful for the virtual presenters and eventual virtual attendees. (Also helpful when the twic…
-
```
What steps will reproduce the problem?
1. I connected HWAWEI USB modem and tried n900 over USB
2. Save profile with all operator settings
3. click connect
What is the expected output? What do you…
-
Maintainer: @feckert, @aleksander0m
Environment: aarch64, Banana Pi BPI-R4, OpenWrt SNAPSHOT
Description:
This issue only happens for the modem on the M.2 socket. Modems on the mPCIe sockets ar…
-
hello, Ubuntu 14.02, USRP B210.
To add the subscriber to the registry
sudo ./supauthserve
sudo ./nmcli.py supauthserve subsciber create "nokia" IMSI200550000000005 6136061 D60D6F39A4B0CE95E6141FB…
-
## Issue Description ##
I am trying to connect a Samsung A130 to the 4G srsenb/srsepc setup but fail to complete the Security Command flow due to UE capabilities mismatch send from the UE side
#…
-
Hello.
I'm trying to set up a UMTS network with a USRP N210 which has an Ethernet
connection with the pc, I already managed to register the sim, however it
is not assigned an IP address.
Using …