-
A lot of components have gone up in price and/or are no longer available. Currently it is almost impossible to make a unisolder.
By open sourcing the PCBs, updates to the BOMs and footprints would br…
-
No trace of Q10, Q11 on https://github.com/valerionew/unisolder-notes/blob/master/BOMs/Unisolder%20BOM%20TME%20Farnell.xlsx
This is serious.
-
One of the things that is great about the custom firmware for the STM32 T12/C245 stations, is the ability to save individual tip calibrations, since even with genuine JBC tips, different versions/mode…
-
Hi,
I'm planning to assemble a unisolder unit and I found your notes very useful, especially the BOM.
I just have a small question: I did not find Q10 and Q11 listed in the Excel file but there is…
-
I was just looking into different irons and ease of the system to control the heat.
does anyone have data on which controls it's heating best?
i've seen a marco reps video on the jbc 245 it seems go…
-
Hi,
I was considering adding some talk about possible enclosures and how to build them. I don't know if there is much information regarding this topic in the thread. I've seen some aluminium extrus…
-
We have an elusive problem on our FabLab with Unisolder where the wrong tip is detected, and this resulted in a burned tip. Troubleshooting has not been successfull. We would like to implement a softw…
-
Was having a lot of problems getting a rotary encoder to work. Finally found this note, buried in the thread. Would be nice to put this into your notes so it's more easily found.
Information was …
-
Hi there, I'm working on a controller of my own (nothing wrong with unisolder, just too complex for me :) ) and wanted to find what exact thermocouple type is on the C245 series cartridges by JBC. I'v…
-
## Objective
I would like to look at the feasibility of producing a soldering station controller capable of controlling Hakko T12, JBC C245, JBC T210, and possibly JBC C115 handsets, and auto-detec…