-
pad 2 has only one usb C port .
which USB C hub is good for pad 2 .
-
-
Was checking out an on-line auction site and came across this unit: https://www.waveshare.com/usb-hub-7u.htm looking at the PWB picture it seems possible that this unit could have individual switching…
-
An integrated 4 or 6 Port USB-Hub on the USB-Adapter PCB could be a solution for a more sophisticated wirering for toolchangers like the Stealthchanger.
-
USB Hub (to access other pedals over USB)
USB slave (for audio data)
-
Though use of 'gsettings set org.gnome.desktop.privacy usb-protection false' has some effect there is no permanent fix.
Set-up is a Monitor with USB-C and USB-A ports, there is a USB-A (3.1) hub c…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
# USB Hub dead
## Hardware:
- BTT M8P
- Raspberry Pi CM4 2GB ram, 32GB eMMC
- Voron 2.4 printer
## Issue:
* M8P's onboard USB hub has died 48 hours after unboxing.
# Diagnosis:
I was goi…
-
In `hwinfo` I see this:
46: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: POWV.ICYKfTdMza8
Parent ID: k4bc.2DFUsyrieMD
SysFS ID: /devices/pci0000:00/0000:00:14.0/…
-
I am looking for a solution to switch the power of usb port and found this wonderful tool!
I have none of usb hub in the supported list, so I tested this on the hub I have, [I-O DATA US3C-UERGB/H2]…