-
In v4, if you disable continuous export and remove the USB drive, we properly don't display the "No USB drive detected" screen. But we also don't accept any ballots until a USB drive is reconnected. T…
-
### Development Kit
openocd-esp32
### Module or chip used
Beetle ESP32-C3
### Debug Adapter
usb-jtag
### OpenOCD version
v0.12.0-esp32-20241016
### Operating System
linux
…
-
I decided to try to raise nut for the subject, but alas it doesn’t work, and the application was written for Windows in 2018.
Could you maybe advance me a little?
```
server@debian:/etc/nut$ nu…
-
Currently, we are using the `u-boot-engicam_2022.04.bb` recipe as part of the `meta-engicam-nxp` layer.
We are unable to start the usb in the otg mode and get the below error.
```
u-boot=>
startin…
-
The HP LaserJet Pro P1100 plus is a printer but does not have scanning functionality.
BasicCaps bytes: [8 33 1 1 0 4 17 0], it's length less then 10
https://github.com/OpenPrinting/ipp-usb/blob/…
-
With Pi 4 B Buster 32 bit clamscan:
USB-HDD 1TB mounted in fstab with: /dev/sda1 /Documents ntfs-3g recover,noatime 0 0
Start in the terminal for user files: sudo /usr/bin/clamscan -r -i …
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
I installed tvheadend as docker container on a raspberry pi 3+. I have 3 cabel tuner.
The ha…
-
Procedure:
1) Insmod Kernel Module
`insmod esp32_spi.ko`
2) Wait for ESP Device handshaked success!
3) Remove Kernel Module
`rmmode esp32_spi.ko`
Device Driver hangup at step https://github.c…
-
### Describe the bug. What happened?
I have tried to install both versions of the weasis using the downloads version 4.5.0
My config is M1 silicone MacOS v14
I get an app unexpectedly crashed
…
-
It seems that somehow, webman uninstalled itself, I tried to reinstall it. Now XMB just sits there and loads, forever. On a slim with cobra and evilnat. Any suggestions so that I do not have to wipe t…