-
Otherwise the stick changes while it is being copied. (Although the whole mechanism seems messy. Can we boot the USB stick in a read-only way?)
Either `doinst` enables the timers on the target manual…
-
hello, I recently changed to the new hen 2.4b17.3, before I was using the first 2.4b17 and it was running normally, but now after I had to change and update the method, before I used the llbranco one …
-
Good day. I am interested in subj!
-
Hello Chris
Thank you for ctOS. I encountered a ctOS boot failure, please help me with some suggestions.
I burned _cdimage.iso_ into a USB flash stick and with this USB flash disk I start up my rea…
-
**Describe the bug**
When using `harvester.install.wipe_disks=true`, the installer will wipe all the disks it can find by running `lsblk` and checking for `type=disk`. This unfortunately includes USB…
-
I'm running aqemu on kubuntu 22.04 and run a kubuntu 18.04 as the guest. I added a USB stick as USB-Port. The Stick is not visible in the guest.
-
A friend and I were flying in a competition recently with OpenVarios with the latest OpenSoar 3.22 images (https://opensoar.de/releases/v7.42.22/OV-3.22.0/) and have both experienced the following iss…
-
### Describe the issue you are experiencing
Aeotec Z-wave gen5+ stick dissapears from system after updating to HA OS 13.0.
It is not detected as connected anymore.
Downgrading to HA OS 12.4 solves …
-
### Type of request
New device support
### Meter description
Hello,
I am very sorry for the beginner question but I could not get any information from the wiki on this device and I also trie…
-
![IMG_20231111_194418](https://github.com/FedoraQt/MediaWriter/assets/30806939/cf813c9c-36d5-460a-b61a-63ee4aa6c022)
This is a copy of my post to thread on Fedora Project Discussion:
https://discu…