-
Can you please put the Allwinner V831 SDK up somewhere? We have a bunch of code running on the Allwinner V536 using their MPP library to implement WebRTC. I think this WebRTC code should easily port …
-
https://wiki.sipeed.com/news/MaixPy3/v831_Distance/v831_Distance.html
V831完美的单目测距
-
I was able to successfully run an old version of MaixPy3 on a generic IP camera (v831).
However, the new versions of the library (camera) seem to be strongly coupled to the need to have a display.
…
-
Hello, after
> python train.py -d custom -v slim_yolo_v2 -hr -ms
i've got
> Evaluating detections
> Custom metric? Yes
> AP for killer = -1.0000
> AP for robokit = -1.0000
> Mean AP = -…
-
Hi, Sir:
最近入手sipeed maix ii dock, v831,試著使用板子上的3路pwm驅動遙控車
常使用的servo。該種servo的pwm頻率是50Hz。pwm產生為使用maixpy3的pwm
類別,使用示波器量測信號,最靠近的頻率是61Hz,無法再低。
maix ii dock上燒錄的映像檔版本是maixpy3-0.3.5_MaixII-Dock_202112…
-
Hi I trained a tiny yolo v3 model with the scripts provided in this repo, however when I tried the `test.py` script I got the following error:
```
input shape: torch.Size([1, 3, 224, 224])
/home…
-
How do I compile these modules?
I'm looking for a solution to read the device's camera:
QG2101A Cortex-A7 (Yi Y20GA is an IP camera with QG2101A chip (a rebranded Allwinner V831).)
tell me if…
-
That's what I get trying to flash the device,after a progress of the flashing task.
This is the last part of the log in terminal:
:usbtool.lua_2838>:fes down partition fail
:usbtool.lua_3660>:dow…
-
Hello,
I could follow successfully the Slim YoloV2 tutorial and deploy a model with my custom data on the V831 board. However, the results where not as expected, so I proceed to increase the input…
-
你好,下载的toolchain-sunxi-musl-pack-2021-01-09.tar.xz里面的linux/version.h里面的version code跟https://api.dl.sipeed.com/shareURL/MaixII/SDK/release 下载的image使用的linux内核版本不一致,toolchain-sunxi-musl-pack-2021-01-09.ta…