-
The possibility to send VCDS log files via the GUI must exist. Ideally, these should be automatically generated via, for example, an AutoIt script and pulled from the log file folder of VCDS.
-
Before i can begin a VisME7L logging session, i have to open up VCDS and connect to the ENGINE module. Without this step i get an error code 1, can't load FTDI library etc...
qdubz updated
3 years ago
-
I have a Legacy Ross-Tech HEX-COM+CAN cable that I use to run VCDS on a 2001 VW Golf GLS 1.8T, which it does flawlessly, on a Windows 10 laptop with a _native serial port_ running on COM1.
I have t…
-
We rely on an out of date chisel. Moving to the new chisel requires rewriting some of the testing code, and checking which if any interfaces changed
-
It just installs VCDS into a wineprefix, which is meaningless since VCDS will not see the USB interface anyways.
-
The tool shows only the first 9 colums of any vcds log file, but you can log maximum 12 colums in vcds
-
Hi,
Sadly I get timeout every time I run _dumpMarelliMem 14336 2048_ exactly on the _Receiving memory dump_ Step
Tried both Black/Blue types of Chinesium cables, both read stuff via VCDS, none m…
-
The current file upload process is overly complex. Workshops need to be able to access the saved files within a maximum of two clicks. Currently, they are required to navigate through multiple folders…
-
Hi,
I'm currently using free, and limited VCDS/VAGCOM.
Now I need to replace the throttle body on a Golf mk3 1996.
Does kw1281test support Throttle Body Alignment procedure ?
see:
http…
-
I am able to connect to the ECM but I can't pull SKC. I get the sense that these TT clusters vary wildly.
Version 0.99.1-beta (https://github.com/gmenounos/kw1281test/releases)
Args: COM3 10400 …