-
### Description
CIAO HO UN AXPERT IV DELLA VOLTRONIC, E COMPATIBILE?
### Suggested Solution
SI PUO FARE?
### Alternatives
_No response_
### Additional Context
_No response_
-
Hello I wanted to ask the code for Inverter voltronic Infini VII WP .... connected with the rs232-usb cable reads nothing and connects and disconnects ...I think it has the PI17 protocol ... I tried …
-
Hi, I'm trying to install the new esp8266-example.yaml, with the old syssi.esphome-pipsolar@main I read the inverter data (not all, but it's ok). When I install the .yaml file, it gives me some timeo…
-
Hi my inverter is this: infinisolar
https://www.solarpower24.it/negozio/inverter/inverter-hybrid/sp24-infinisolar-v-iv-twin-6kw-48v-inverter-solare-ibrido-off-grid-isola/
Have PI18 protocol.
I…
-
Is there any information how to read status over Bluetooth in Voltronics / Axpert and clones
All they are controlled by WatchPower app on android
Mostly all Inverters with this control panel.
![ima…
-
Hi, I have an Inverex (a local brand that uses Voltronic boards). I can fetch almost all data using the PI30 protocol. But I am having issues fetching energy-related data like pv_generation_today, and…
-
Sorry @syssi if I use an issue to share with you all protocols i found to help your work
I uploaded them on my repository
https://github.com/ardupic/voltronic-inverter-communication-protocols
-
Hi,
I have a noname UPS which shows up like below on lsusb command:
"Bus 001 Device 004: ID 0001:0000 Fry's Electronics"
From what I read on different discussions, it might work with "nutdrv_qx…
-
I have tried to connect to a Voltronic AXPERT MKS IV 5.6KW but I get the following error message `INVERTER: Unable to open device file (errno=2 No such file or directory)`
```
user@device:~/skymax…
-
Hi, I am looking for replicate this project to connect to the voltronic vmIII device. I have an error compiling the firmware... Can I ask for support?
pin32 updated
5 months ago