-
Please pause the telemetry functions for a few seconds at least when the receiver connects to the radio, and give the Altitude and VSpeed sensors initial values of ZERO (not nil). If we wanted to get …
-
**IMPORTANT**: Before you create an issue, please take a look at our [Issue Reporting Guide](https://github.com/alexa/avs-device-sdk/wiki/Issue-Reporting-Guide).
## Briefly summarize your issue:
…
-
Dear, I have a problem, I cannot get the RPM and KM/H to work on a counter of a VW Polo 6C and a T-ROC from 2022. I think it has to do with the CRC, could you please help me? help to get this working?…
-
### Aircraft Version
Experimental
### Build info
```json
{
"built": "2023-04-27T21:19:23+00:00",
"ref": "refs/heads/experimental",
"sha": "c907a0913975558481d0988df291df0d96a0…
-
Version: 1.78
Branch: All
**Slider logarithmic flag that works off the mouse delta **
Sliders have a logarithmic flag that works off value, but options to work of the mouse delta might also be…
-
## Current Behavior
I can't get Baro Altitude telemetry to my radio TX16S (EdgeTX 2.9.4)
I have a drone Betafpv Pavo20 with FC: F4 2-3S 20A AIO FC V1 (STM32F405RGT6)
this board has barometer BMP28…
-
Hello mstrens,
when analysing the log data of a flight with OXS sensor I noticed that
the two GPS position data GPS Lat and GPS Long are recorded in different numbers,
e.g. in the current log file…
-
Hello,
I have got a small PCB board which has GPS(BN220) connected and it works fine
```
Second analog to digital sensor is not detected
Foreseen GPS type is Ublox (configured by oXs) :GPS i…
-
-
### Describe the bug
Very hard Autoland and rwy centerline not held, Aircraft made a hard left right after landing and ended up in the forest crashing
### Steps to reproduce
LSZH ILS34 Autoland
##…