-
My project needs high throughput, and I can achieve it with these settings:
```cpp
#define ETHERNET_LARGE_BUFFERS
#define MAX_SOCK_NUM 1
#define SPI_ETHERNET_SETTINGS SPISettings(80000000, MSBFI…
-
El tema a debatir es si puede hacer/crear una casa domótica con arduino + shield ethernet w5100 + sd como Maestro servidor web y conectar varios esp8266 con funciones diferentes y específicas como esc…
-
Hi All,
I know this project is likely dead, but I was hoping for some charity this time of year...
I have been testing the TCP on the Uno with a W5100 as a slave and cannot seem to read anythin…
-
Hello,
there is know W5100 erratum which causes that socket.cpp -> EthernetClass::socketSendUDP() never returns. It happens during asynchronous bi-directional UDP communication when one packet is b…
-
There exist some hardware bugs in the W5100 (https://www.wiznet.io/wp-content/uploads/wiznethome/Chip/W5100/Document/3150Aplus_5100_ES_V260E.pdf)
I would like to ask people (in particular @oliversc…
-
It seems that the number of sockets is determined in ethernet.h based on RAMSTART and RAMEND. But these facts are both defined for the mega chip instead of the W5100.
They are both defined in arduino…
-
_From @JanosAudron on April 11, 2013 20:37_
Hardware:
Arduino UNO + Ethernet Shield
Software:
IDE 1.0.4 and 1.5.2
After some test I think the problem of the crash of W5100 chip that make it unrespo…
-
Hi yozik04
Now I trying telnet interface with Arduino Uno and W5100 shield for EVOHD connection.
Have you yourself working no wirelles project for direct ethernet connection, which I can not edit c…
-
_From @LoathingKernel on February 1, 2014 12:35_
@MarekLew wrote:
Library TFTP wrong use registers REG_S3_RX_RD0, REG_S3_TX_WR0, REG_S3_RX_RSR0.
Trying to modify AriadneBootloader for W5200 and ATm…
-
```
What change would like to see?
Replace the current ethernet shield w5100.h and w5100.cpp files with the files
attached.
Why? By removing the comment slashes on "#define W5200" in w5100.h will co…