-
Hello,
Wallplug v1 en v2 doesn,t send energy values anymore?
On and off still works
-
Hi,
I have a couple of TKB TZ69 Smart Energy Wallplug’s, Homey see’s them fine using your driver.
However I previously used these with home assistant and they reported back Voltage, this is miss…
-
Cyberjunky, I've used your code to intergrate a Z-Wave Fibaro Wallplug to my Toon / Home Assistant setup.
Maybe this will be usefull for you?
https://github.com/Imperial-Guard/Toon_Smartswitch
-
Thanks for your excellent program, I've installed it on a Artillery Sidewinder X2 and it is working perfect !
I do have a question for enhancement though and I'm not sure if I need to leave a comment…
-
Hi, first of all thank you very much for this wrapper, it works very well and is easy to use.
I recently connected my August smart lock (3rd generation) to my raspberry pi based hub with Aeotec Z-S…
-
Hey,
i have bought some cheap RF wallplugs from german electronics rebrand company "hama". The library dont work out of the box.
i have used this fork: https://github.com/vamanea/rc-switch
to …
BRNKR updated
6 years ago
-
### The problem
I'm trying to add Frient A/S SMSZB-120 smokedetector to my Zigbee network but after the interview phase it isn't configured, though only 2 meters away from the coordinator, resulting …
-
Hi.
I have two z-wave bulb 2's - sitting a few meters away from my homey. They don't update their on/off status when switched on through direct associations from other z-wave devices.
I have Hom…
-
My `BottomConnectorControl.vue` has template:
```
Automatically turn unit on when the power is supplied via the bottom connector.
…
-
Bonjour
Ma clé Zigate est connectée en Wifi, joignable et fonctionne corrctement mais depuis hier, deux interrupteurs filaires, sans neutre, un Xiaomi WallPlug (dont la config a été ajoutée au plugin…