-
Does this fork with MQTT work on the CO2-Ampel-Pro also ?
Best regards
Jens
-
Der Temperaturoffset wird im SCD30 fest abgespeichert und daher braucht man ihn nur einmal setzen.
Ich würde daher vorschlagen den Offset nur zu setzen, falls er auf 0 eingestellt ist. Dadurch würde …
-
I understand from the link below that the TMC2130 in SPI mode can be run purely over the SPI bus with no need for any connections to the step and direction pins. Can I do this using this library?
…
-
Hi Mario,
I worked for Watterott in recent projects and currently work as technical writer for @tribe29. To be able to include the Watterott CO2 traffic lights in Checkmk https://github.com/tribe2…
-
Translated datasheets :
https://github.com/watterott/LGT8F328P-Testing
Arduino hardware cores :
https://github.com/LGTMCU/Larduino_HSP
https://github.com/wemos/Arduino_XI
-
Is it possible to make a MSC-CDC Composite Bootloader for ATmega32u4 that can switch in between MSC and CDC mode on certain event (like rapidly pressing reset button twice)
@watterott have a [simil…
-
It would be nice to also support non native usb avrs with V-USB.
Popular devices are the watterott nanite series or the adafruit trinket products.
I dont know how this works, but here is a bounty:
ht…
-
AFAICS there's only a reference to the IP address of the device... which supposedly relates to versions of the Watterott CO2 Ampel that have a Wifi card (hence APIs ?)
What would be the way to acqu…
-
Hi,
Why don't you add these diodes [https://github.com/watterott/SilentStepStick/blob/master/hardware/StepStick-Protector_v11.jpg](url) directly on your board? I think it would help a lot the printin…
-
```
What steps will reproduce the problem?
connecting the CANdiy shield and the can cable.
then use the serial monitor.
What is the expected output? What do you see instead?
the error i get is:
FF
!!…