-
I think that the calculation performed when requesting Q units for 2d map calculations appears to be only valid when x=0, which does not work if you want to move the detector using rot2.
The functio…
-
## *Repository Creation Request*
Use this to get your experiment repository created or updated on GitHub under Virtual Labs organization.
1. #### Coordinating Institute: IIT Bombay
2. #### Appr…
-
I was playing around with the laser creation to check something about the noise level / lowest intensity based on wavelength bandwidth and number of samples in time. I found that specific combinations…
n01r updated
2 months ago
-
SBAS and PSI analysis on Otmanbozdagh Mud Volcano, Azerbaijan, 2020-2023
Fails at "SBAS Trend Correction": ---------------------------------------------------------------------------
AssertionEr…
-
Here are some tasks related SNR-based termination of exposures using the Exposure Meter.
1. Confirm that the current scale factor between EM counts and main spectrometer counts is correct. This sh…
-
Hello,
I ran a time series processing once using GMTSAR manual, and once using pygmtsar, and got very different results for
**OS and software version**
- OS: Ubuntu 20.04.5 LTS
- PyGMTSAR versi…
-
Hi, I am pretty new to HCIPy so I would greatly appreciate any help. I'm sorry if this is not the right forum to ask for help.
- was generating an aberrated PSF and trying to correct some low-order…
-
@AlexeyPechnikov , Hello Alexey, as seen in the image, you see LOS direction deformations with SBAS analysis. This is a landfill. It is normal for the deformation to be large due to activity. However,…
-
This sound calculator takes two inputs from the user, the sound intensity in watts per square meter and the frequency in Hertz. Then, it calculates the wavelength of the sound wave and the decibel lev…
-
**General**
> (l. 85) 'They can be organized in the following way : catalogs of matrices of measurements for various fields and settings of the antennae pairs distances and orientation. Matrices ar…