-
I'm using the wipy with REPL through the serial port (on the extension board).
It seems that cp() hangs if the buffer size is higher than 254.
Maybe this should be documented or set automatically when…
-
Hello,
First thank you for your work, it's impressive. I am trying to use it on WiPY but in the micropython version 'utimeq' is not yet enabled/implemented, any suggestion of workaround ? I can't …
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* WiPy 3 as W01
* The firmware version you are using. You can get it …
-
From https://github.com/wipy/wipy/releases/tag/v1.3.0:
> Update to release v1.8.2.
Why update to a previous release, if 1.8.3 is out for couple of weeks? There were already reports of people trying …
-
Hi,
I'm often using the same tags group, like : #IoT #DiY #WiPy #MicroPython #Python #Make #Maker #Hack #Hacker #FabLab #MIPS-lab
Perhaps it's should be nice to have tags group defined in profile…
ghost updated
4 years ago
-
Add a manual for the expansion board.
https://github.com/pycom/pycom-documentation/blob/master/chapter/datasheets/boards/expansion.md
A good start would be the previous expansion boards manual: ht…
ghost updated
5 years ago
-
Hi mo,
i tried it out however after 3682/9364 files I stumpled over an exception when scanning thru the micropython repo:
```
...
file: tests/wipy/wlan/server.py.exp, 65 bytes
file: tests/wipy/wl…
-
First a big Thank You for this fantastic piece of software.
I work with Micropython and Thonny helps me a lot. Now I wanted to use it with my WiPy (1.3) boards and I did not succeed in establishing a…
-
Hi, I have an Adafruit 20x4 Display (https://www.adafruit.com/product/499) and I'm trying to hook it up to a PyCom WiPy 3. However, I don't think the WiPy uses the standard GPIO pins used by you libra…
-
Thanks for posting this code. I have done something similar, but I'm finding that it takes the WiPy *much* longer than 2 cycles between transactions. You wrote this (below), but when I actually look a…
ghost updated
6 years ago