-
Hi raenji-sk,
does your flow work actually with your setup?
Trying to find a SmartMeter Emulator / Gateway to use my SMD72 instead of the SDM630 for my X1-Mini
Got Homeassistant working alrea…
-
I pulled in all the filament presets in to Orca, but only 2 showed up (with the inherits folder in place). I just realized that the inherits presets are only set to be compatible with BBL X1, X1C, and…
-
### Bambu Studio Version
1.9.3.50
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 10
### Additional system information
_No response_
### Printer
Bambu Lab…
-
Hi @Innixma
When 'n_train_subsmaple' is set to 5000, and the number of train_data is larger than 5000, say, 40000, the following error is reported.
### **Error messages**
File "C:\miniconda…
-
Some RS485 to UART module use the DE/RE flow control pin. However only TX/RX is used currently, meaning in cannot work with the MAX485 one.
This issue is similar to https://github.com/syssi/esphome…
-
I couldn't get the HA SolaX integration to load reliably, so tried some tests by calling the solax functions directly from Python using the test code from the front page of this repo.
I have two in…
-
### Describe the bug
Hello, I operate 3 Solax inverters: 1 x X3 Hybrid and 2 x X1 mini.
I can add these and everything works fine. But after restarting HA, out of 2 inverters the entity is no longer…
-
Hi @squishykid,
I have lookup tables to decode data for following models:
- X1-Hybiyd/Fit
- X1-Boost/Air/Mini
- X3-Hybiyd/Fit
- X3-20K/30K
- X3-MIC/PRO
- X1-Smart
- X1-AC
- A1-Hybrid
- A1-…
-
### Bambu Studio Version
1.8.4.51
### Where is the application from?
Bambu Lab Official website
### OS version
Macos 14.4.1 (23E224)
### Additional system information
M1 mac mini
### Printer
…
-
### Bambu Studio Version
1.7.6.92
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 10
### Additional system information
_No response_
### Printer
X1 Carbon…