-
### What happened?
Device pairs, but doesn't report anything until a second attempt at pairing.
After the second attempt, it reports its state, but doesn't respond to any of the actions.
OPEN/CLOSE…
-
Hi, I'm new to this but have searched the web extensively and can't get a 2-gang wall switch to work on your-homebridge. Any way or help?
-
### Problem description
The blind motor is detected but no controls are present.
### Solution description
I would like it to have cover controls as per my other blind motors (TS0601 by _TZE2…
-
hello .... could you add support for the model below?
application: 41
endpointId: 01
manufacturer: _TZ3000_rdtixbnu
model: TS0121
01 0104 0051 01 06 0000 0004 0005 0006 0702 0B04 02 0019 000A
-
### Problem description
Paring went smoothly but I don't see any sensors or entities
### Solution description
Sensors and entities to display power in W and energy in kWh
### Screenshots/V…
-
## The problem
Error: Connection to device succeeded but no datapoints found, please try again. Create a new issue and include debug logs if problem persists.
When try to add:
"model": "ZMHK-…
-
When adding a second device they influence each other when you add a function in the device settings
ie when you program the first button the settings for the first button at the other device are era…
-
So i have bought 22 new 4 gang buttons only to find its an updated version what i can see is that the model and manufacturer is changed so the device handler does not work anymore dus anyone have an u…
-
![image](https://github.com/doctor64/tuyaZigbee/assets/41837153/5d6816c8-6fa9-4c23-aa96-6c29f628d36c)
Hi Alex.
May I ask you to add support of very nice and beautiful switch Zemismart ZM-H7.
Pr…
-
Hello.
Thanks for changing the code to incorporate the new TS004F model.
When added as the device handler, Smartthings recognises it as a Tuya Switch and you can assign the 4 buttons.
But Unfortu…