issues
search
AMSAT-NA
/
PacSatSW
MIT License
4
stars
1
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Config.h variables should be fully documented
#40
ac2cz
opened
1 month ago
0
An Ax5043 is partially working on a Launchpad board
#39
ac2cz
opened
2 months ago
1
Code to turn PA power on and off with Tx
#38
N5BRG
opened
3 months ago
0
We should try the RTC multiple times at startup before assuming it is not working
#37
ac2cz
opened
4 months ago
6
Add the callsigns to the start up messages in the console
#36
ac2cz
opened
6 months ago
0
The receiver should be configurable by command to process PB, BBS, Commands or Digi
#35
ac2cz
opened
6 months ago
0
A ground command should allow the packet rate to be set for each channel
#34
ac2cz
opened
6 months ago
0
Digipeater needs to be implemented
#33
ac2cz
opened
6 months ago
0
Don't add corrupt headers to the dir
#32
ac2cz
opened
6 months ago
0
Updating or purging a file should always send a valid dir header to the ground station.
#31
ac2cz
opened
6 months ago
0
PB File broadcast does not handle the TX Queue being fulll
#30
ac2cz
opened
6 months ago
0
The ax5043 power levels are hard coded.
#29
ac2cz
opened
6 months ago
1
If we update the oldest header then the client can not close the hole in the dir
#28
ac2cz
closed
6 months ago
1
Add bytes to digipeted packets to show signal strength or congestion
#27
ac2cz
opened
7 months ago
2
Time on spacecraft is offset by 6 hours when booted and connected to debugger
#26
ac2cz
closed
6 months ago
0
Time message error
#25
billreed
closed
6 months ago
4
Directory is corrupted if the uploader has a 6 digit callsign
#24
ac2cz
closed
6 months ago
2
The logic for setting the clock needs to be decided. Right now only set at boot.
#23
ac2cz
opened
1 year ago
0
Telemetry conversions for the demo
#22
ac2cz
opened
1 year ago
2
The ground station pauses after uploading a file even if it has another to upload
#21
ac2cz
closed
11 months ago
0
dir_next_file_number() should confirm there is no file on disk with the same number already
#20
ac2cz
closed
6 months ago
2
In process file uploads need to be stored in a table in MRAM.
#19
ac2cz
closed
6 months ago
3
FalconSat-3 sent a UI frame each time a station logged in. We do not.
#18
ac2cz
opened
1 year ago
0
The number of AX25 preamble bytes should vary based on baud rate and back to back packets
#17
ac2cz
closed
1 year ago
3
The AX5043 interrupt needs to pass the RX Channel number to the RxTask()
#16
ac2cz
closed
6 months ago
4
We should support longer packets that span more than one AX5043 FIFO.
#15
ac2cz
opened
1 year ago
0
PB, Uplink and DIR maintenance functions need to run periodically
#14
ac2cz
closed
1 year ago
2
We need to keep track of the number of bytes broadcast and send the value in a BSTAT packet
#13
ac2cz
opened
1 year ago
0
We do not check the version bits for incoming PB Packets
#12
ac2cz
opened
1 year ago
0
Copy of a PB Entry could be optimized better
#11
ac2cz
opened
1 year ago
0
Commandable configuration is currently set with #defines
#10
ac2cz
opened
1 year ago
0
Code needs to be written to support the Real Time Clock (RTC)
#9
ac2cz
closed
11 months ago
1
The state of the radios should be stored in a structure so it can be included in telemetry
#8
ac2cz
opened
1 year ago
1
Flow ON and OFF are currently not used in the AX25 state machine
#7
ac2cz
opened
1 year ago
1
Send a DM message to a station that tries to connect to an already busy channel
#6
ac2cz
closed
1 year ago
0
Many functions return an error code but the error is not yet logged or handled
#5
ac2cz
opened
1 year ago
1
If the processor resets then connected stations or PB sessions will be lost
#4
ac2cz
closed
1 year ago
4
Clean up het
#3
burnsfisher
closed
1 year ago
0
If Unix time is not set then the DIR does not load correctly at startup
#2
ac2cz
closed
1 year ago
1
PB only handles the first hole in a list of dir holes.
#1
ac2cz
closed
1 year ago
1