ANYCUBIC CHIRON V1.2.7 based on marlin 1.1.0
-> M1000 Manual leveling
-> M1001 Auto leveling
Creating a txt, input
M140 S0
M104 S0
M1001
Save and rename it as "Auto_leveling.gcode",copy this file to SD card. Print it from 'PRINT' menu to active auto leveling function. If need,manual leveling likes below:
M140 S0
M104 S0
M1000
So we can easy switch manual leveing or auto leveling by "Auto_leveling.gcode" and "Manual_leveling.gcode"
Otherwise, if manual leveling activated , auto leveling will unavailable, also the Z of home position will more lower than auto leveling. If auto leveling activated, the default Z offset is -14, acutally the current Z offset is about -16.5~-17.5, just for make sure nozzle will not friction platform. So please be patient to adjust the Z offset.