Have you ever found yourself begrudgingly installing python packages globally when using ROS1? Have you ever been annoyed by constantly having to configure your ROS_IP and ROS_MASTER_URI environment variables for your different robots? If your answer was "yes", then this little bash script is for you!
ROSVENV is a very small set of bash scripts that help you to create and use catkin workspaces with isolated Python environments. It can source and un-source (is that even a word?) your workspace, and can configure your connection to distant ROS masters easily. Even more: With the discontinuation of support for ROS1 for Ubuntu versions beyond 20.04, ROSVENV can help you with dockerizing your ROS1 workflow so you can continue it on higher Ubuntu versions (currently tested with 22.04).
Sounds good? Then come right on in!
(Only tested with noetic and Python3 so far, so, beware...)
Installation is as easy as chewing gum! That being said, if you are using Ubuntu 22.04+, you should probably install docker first.
In case you do not want to run ROSVENV in docker you need to have installed either python's venv package or conda:
venv
# For all ROS versions. Python 2 does not have venv
sudo apt install python3-venv
Simply source the install script:
source path/to/rosvenv/install_rosvenv.bashYou can also do ./install_rosvenv.bash, but then you'll have to re-source .bashrc.
What did the install script just do to your system you ask? Well, it simply copied the file rosvenv.bash to ~/.rosvenv.bash and added source ~/.rosvenv.bash to your ~/.bashrc. Re-running the script will only perform the copy again, but will not modify your .bashrc unless the function createROSWS is nowhere to be found.
To uninstall rosvenv, you cat just delete ~/.rosvenv.bash and remove the following lines from your .bashrc.
# ROSVENV
source ~/.rosvenv.bash
export ROSVENV_ROOT=<PATH>In case you used docker, use
docker rm -f "$(docker ps --filter "name=_ws" -q)"to kill all your running workspace containers (this assumes that all your workspaces contain _ws in their name).
Use docker image rm rosvenv:latest to remove the ROSVENV base image. Unfortunately there is currently no way to remove all dependent images. Use docker image list -a to list all images and remove the undesired ones with docker image rm image_name.
ROSVENV provides a whole six (6!) commands. Let's go over them...
createROSWS path/to/new/wsThis is probably the first command you will try out. createROSWS takes a path for a directory to create and initializes a new catkin workspace within it. If ROS is not sourced it will source your installed version from /opt/ros/*/setup.bash. NOTE: If you, however you managed that, have multiple ROS versions installed, it will source all of them. In that case you should source ROS manually first.
If, when running the command you have an active conda environment, its name will be saved to a condenv.txt placed in the root of the workspace for later automatic activation.
Otherwise, it has created a pyenv directory containing the venv for your workspace. The structure of your workspace should look something like this:
ws
├── build
├── devel
├── logs
├── pyenv (optional)
├── condenv.txt (optional)
├── pypath (optional)
└── srcIn the diagram above, you can see the pypath file which is marked as optional. This file is a copy of ~/.pypath, if that file exists. Its purpose will be explained in the next section.
The creation process will invoke catkin build once to generate the necessary setup.bash file and will then activate your newly created workspace.
This command you'll probably use the most. It activates a workspace, sourcing its setup.bash, activating the respective virtual environment (conda or venv), and setting your ROS_IP and ROS_MASTER_URI to your local machine.
Its single argument is the path to the root of the workspace you want to activate. If you do not give any argument, it will default to ~ws. If you have a primary workspace you work on most of the time, you can link it to that path.
The activation command can also modify your PYTHONPATH variable with custom paths stored in pypath at the root of the workspace. The paths are stored one per line:
path/a
path/b
path/c
...This command simply deactivates the ROS workspace again. It restores the paths that were modified by the catkin setup files and deactivates the virtual environment as well.
While it does not take any arguments, one thing should be noted about it: It will unset all environment variables with ROS in the name.
At times, especially after building a new package, catkin will require the workspace to be re-sourced. This command does just that!
This command will come in handy once you are ready to work with your actual robot friend. It changes the ROS_MASTER_URI and optionally also ROS_IP variables to connect you to a remote master.
Usually you will simply pass the name/IP of the remote ROS master to the command:
$ makeROSMaster 192.137.131.1
Changed ROS-Master!
ROS-IP: 127.0.0.1
ROS MASTER URI: http://192.137.131.1:11311
However, sometimes this pattern will not suffice. For those cases you can specify exceptions in the ~/.ros_ips or WS/ros_ips files. The file from the workspace overrides whatever might be specified in the file in ~.
Exceptions are formulated like this:
foo_IP=192.137.131.22
foo_URI=http://192.137.131.1:11311
bar_IP=66.137.131.22
bar_URI=http://66.137.131.1:11311
...Please make sure that the files close with exactly one newline.
You can also specify only IP or URI for an exception, it does not have to be both. Given the config obove, you can use makeROSMaster foo to set the ROS_IP, and ROS_MASTER_URI environment variables to 192.137.131.22 and http://192.137.131.1:11311 respectively.
Lastly, if you do not want to always have to type the host name, you can add a DEFAULT=MY_CONFIG_NAME line to either of the ros_ips files, which will cause the command to default to that host. In some cases, such as rosvenv being deployed on a robot, you will always want to use a non-standard URI/IP setup. For this case, you can add an AUTO=MY_CONFIG_NAME line to the config file. The designated host will be automatically configured whenever a workspace is activated.
For editors, namely VSCode, the catkin package structure represents a problem when running Python applications in debugger or running Jupyter notebooks, as the kernels do not find catkin packages. This can be remmedied by using a .env file which contains the necessary environment variables to locate the packages. The refreshROSEnvFile automatically recovers these variables and writes them to WS/ros.env. You can then set this file to be used by VSCode. Note, that there is a separate setting for debug configs, in case you run into trouble with the global setting.
That's it! We hope this makes working with ROS a bit easier for you. If you find a bug, feel free to post and issue.
As the world moves on and Ubuntu versions get discarded, so this happened to Ubuntu 20.04 - the last version officially supporting trusty ROS1. As most of our robots still run ROS1 and most of our tools are ROS1, this is a catastrophic development and must be dealt with. Instead of trying to figure out how to install ROS1 on future versions of Ubuntu, ROSVENV opts for eternally cocooning itself in the save embrace of a docker container. Everything you have learned about the workflow with ROSVENV so far remains the same, but you need to install docker on your system.
Follow the official instructions for installing docker (https://docs.docker.com/engine/install/ubuntu/) and add yourself to the docker group so you don't have to have sudo rights to use docker:
sudo usermod -aG docker $USERAfter changing your membership, you'll have to log out and back in again for the change to take effect. (Sometimes a system reboot is required as well). Use groups to check that your membership in the docker group has been recognized. To check that docker has been installed successfully, run docker run hello-world.
If you have an Nvidia GPU, you'll also want to install the nvidia-container-toolkit as described here: https://docs.nvidia.com/datacenter/cloud-native/container-toolkit/latest/install-guide.html. You do not need to run the configuration step after installing the toolkit using apt. Simply restart the docker daemon: sudo systemctl restart docker.
The overall workflow with ROSVENV remains the same. createROSWS creates a workspace, activateROS activates a workspace. Docker acts as a hidden layer in both cases.
To create a dockerized workspace pass the --docker option to createROSWS. By default createROSWS will use the rosvenv:latest image to do so. This is a basic image built on top of the osrf/ros:noetic-desktop-full image. The most important thing this small expansion does, is mirror your user details into the container so that you can work on your host system without creating weird file ownership issues. It also adds venv and other small tools like git that the base image is missing.
You can also use custom images, but you should always base them on the rosvenv:latest image. To create a workspace with a custom image, pass the name of the image or the path to the Dockerfile to --docker like so:
# Custom pre-built image
createROSWS my_ws --docker my_image:tag
# Image based on Dockerfile
createROSWS my_ws --docker path/to/some/DockerfileIn case of the Dockerfile the file will be copied to the root of the workspace, in the other case a file docker_override will be created at the root. These files serve as indicators for ROSVENV that this is a containerized workspace. When you activate a workspace with activateROS, ROSVENV will automatically launch the matching container image, or sign into the container if it is already running.
Working inside a container is no different from working on your regular system. The commands mentioned above do the same thing as they do outside, except for deactivateROS making you leave the container. Alternatively you can also use Ctrl+D to leave the container. You can tell that you are inside the container by looking at your bash prompt, as the container identifies as a host with the name of your workspace:
# Outside of container
me@my_machine:~ $ activateROS my_ws
>> Signing into docker (rosvenv:latest) for workspace /home/me/my_ws
>> Starting docker container "my_ws" with image "rosvenv:latest"...
>> Found installation of nvidia-container-toolkit. Exposing your GPUs to the container...
>> 1ad1aecc6325bafd4dbe3dbfe71d8ab8fb998ebdd4b0d13c170f4dbc4d44873b
>> No conda env found. Sourcing venv
>> ROS activated!
(ROS noetic) (pyenv) me@my_ws:~ $ # Now we're inside the containerBy default, ROSVENV mounts your home directory into the container and places you in the directory where you invoked activateROS. As long as you are only working in your home directory, you should not need to do much else. However, you can also customize the arguments passed to the container, for example if you want to mount another directory into it. To do so, you simply create a docker_args file at the root of the workspace and specify the options you need:
# in docker_args
-v /my/data/dir:/data # mounts /my/data/dir as /data inside the container
-v /my/music/dir:/music # mounts /my/music/dir as /music inside the containerNote: There are no comments allowed inside this file.
To see what is possible, please refer to the CLI documentation of docker run.
To enable terminal colors inside the container, uncomment force_color_prompt=yes inside your ~/.bashrc.
Different from working with ROSVENV on your host system, leaving the container does not end its operation. Using docker ps -a you can see which containers are currently running. If you want to explicitly stop a container, you can use rosvenvStopContainer [path/to/workspace] to do so. This will invoke docker rm -f for the container for that workspace. Note that you don't have to pass the path to the workspace if you're somewhere in its directory tree.
Sometimes it seems that containers loose access to the GPU after a longer time of operation. In that case it is necessary to restart the container. Leave the container using deactivateROS or Ctrl+D and run rosvenvRestartContainer [path/to/workspace]. This will stop the current running container for the workspace and restart it, pulling you back into it.
Sometimes you might change your Dockerfile and then need to rebuild your docker image. ROSVENV helps you with this with the rosvenvRebuildContainer [path/to/workspace] command. This command will only work if the workspace contains a Dockerfile or the workspace is set to launch the rosvenv:latest image. If this is the case, it will rebuild the image in question and (re-)start the container with the newly built image.
There a couple things to be aware of when using docker in combination with ROSVENV:
docker_args files and -v option (see examples above). We don't think this is an atypical assumption to make, but think you should be aware of it.~/workspaces/my_ws and ~/my_ws will both look for a container called my_ws. Essentially you cannot/should not have duplicate workspace names running at the same time.docker images -a to see a list of images on your system and their sizes. Use docker image prune to remove these old versions.activateROS to activate your parent workspace and go inside its container. Inside the container use createROSWS to create the new child workspace. After it has been created, manually copy the parent's docker_override file to the child workspace. If the parent has a custom image it uses, aka a Dockerfile at its root, create the docker_override and write the image name into it. This saves you some disk space./tmp/COMMAND inside the container. The shell inside the container reads this file and executes the command before it hands control over to you. Since there is only one container instance per workspace, multiple clients entering the container at the exact same moment can potentially lead to race-conditions. We have not experienced this so far, but have also not tried massive automized access to the container.git comes pre-installed in the rosvenv base image, it seems that double-tab completion does not work. We don't know why that is.We hope this tool will support you in managing ROS workspaces and network configurations, now and in the future. If you find any issues, please file them with the repository.