Spring 2024, Dr. Shalan
Goal: is to provide a circuit capable of testinga chip under changing voltage and temperature.
Getting Started: https://projects.raspberrypi.org/en/projects/getting-started-with-the-pico/1
Documentation: https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html
Our digital Microcontroller
micropython
code to execute and control the circuitry
Datasheet:
Datasheet: https://www.alldatasheet.com/datasheet-pdf/pdf/227422/ETC2/TEC1-12706.html
A better datasheet or reference is needed
Thermoelectric cooler
Datasheet: https://u.pcloud.link/publink/show?code=XZEJx00Z2zHjB7IoRRXOGcCnvikJS4BVzfdy
Volatile Memory Digital Potentiometer
Datasheet: https://u.pcloud.link/publink/show?code=XZEJx00Z2zHjB7IoRRXOGcCnvikJS4BVzfdy Example: https://electropeak.com/learn/interfacing-x9c103s-10k-digital-potentiometer-module-with-arduino/
Datasheet: https://u.pcloud.link/publink/show?code=XZfujk0ZSR5hogIrCKkFY19oXnh8zp0lHThX
Datasheet: https://u.pcloud.link/publink/show?code=XZfujk0ZSR5hogIrCKkFY19oXnh8zp0lHThX
Datasheet: https://u.pcloud.link/publink/show?code=XZfujk0ZSR5hogIrCKkFY19oXnh8zp0lHThX
Datasheet: https://u.pcloud.link/publink/show?code=XZqG0X0ZURodwRRACp8z1VfRVn5GCHM6Uq97
It will be used to assist with voltage control. See the voltage control circuit diagram for more details
[!NOTE]
Optional circuitry \ High Power Resistor
- is used to reduce current on the thermoelectric cooler if normal operating current is too high for our need
H-Bridge
- mainly for experimentation
- is used to be able to switch the polarity on the thermoelectric cooler so we could switch cooling and heating