Home Assistant AddOn Modbus Proxy
Allows you to connect multiple clients to one single modbus server. Usally one modbus server only allows a single connection and denies any more clients.
The addon is only tested and compatible with hassio supervisor.
Installation
- Add This Repository (Or click Button above)
- Install ModBusProxy from the Add-On Store
Configuration
- Stop all Clients that currently connect to the modbus server. The Server might need some time before another client (our proxy) can connect.
- In case you are using solaredge-modbus in homeassistant you can change the server address here: /config/.storage/core.config_entries.
- Before starting go to the configuration page and set the ip of your modbus server.
- Start The Add-On
- This may take a while on the first start as it builds the cointainer locally. If there is more interest ill switch to prebuild containters.
- Configure Your Clients to connect to your HA IP and choosen port.
- I recommend not to change the listenport in neither the network section nor the listenport.
Configuration Tab
Output after Start
Mentions
This addon uses the modbus-proxy of tiagocoutinho: