The J-Tech Digital HDMI Matrix integration allows you to control and manage your J-Tech Digital HDMI Matrix directly from Home Assistant. The integration provides the following features:
To install the J-Tech Digital HDMI Matrix integration, follow these steps:
Add the custom repository to HACS:
https://github.com/AlexOwl/jtechdigital-ha
.Install the integration via HACS:
Restart Home Assistant to apply the changes.
After installation, you can configure the J-Tech Digital HDMI Matrix integration via the Home Assistant web interface:
The J-Tech Digital HDMI Matrix integration offers the following customizable options:
Toggle HDMI Stream: If enabled, the matrix will switch on and off the stream to HDMI outputs when the media player is turned on or off, optimizing power efficiency.
Toggle CAT Stream: If enabled, the matrix will switch on and off the stream over CAT outputs when the media player is turned on or off, optimizing power efficiency.
Send CEC Power Commands to Source: If enabled, the matrix will send power on and power off commands to the currently selected source (e.g., turning off the Apple TV when the media player is turned off).
Send CEC Power Commands to Output: If enabled, the matrix will send power on and power off commands to the HDMI output (e.g., turning off the TV when the media player is turned off).
Delay (Stream Toggle to CEC Power): Used when "Send CEC Power Commands to Source" or "Send CEC Power Commands to Output" is enabled along with "Toggle HDMI Stream" or "Toggle CAT Stream." Adds a short delay between toggling the stream and sending the CEC power command.
Delay (CEC Power to Source): Used when "Send CEC Power Commands to Output" is enabled. Adds a short delay between sending the CEC power command and the subsequent "source" command (to output).
For any support or inquiries, feel free to open an issue on the GitHub repository. Your feedback and contributions are welcome!