Programmable completion specification (compspec) for the bash shell to support the iptables and ip6tables programs (netfilter.org).
Programmable completion allows the user, while working in an interactive shell, to retrieve and auto-complete commands, their options, filenames, etc. Pressing [TAB] will complete on the current word, if only one match is found. If multiple completions are possible, they will be listed by hitting [TAB] again.
This completion specification follows the logic of iptables and will only show commands and options, when they are available for the current context (combination of commands and/or options). Also some values entered by the user are checked for validity and completion will not continue after an invalid input. All together providing some kind of interactive help.
Quote from bash-completion README:
Install it in one of the directories pointed to by
bash-completion's pkgconfig file variables. There are two
alternatives: the recommended one is 'completionsdir' (get it with
"pkg-config --variable=completionsdir bash-completion") from which
completions are loaded on demand based on invoked commands' names,
so be sure to name your completion file accordingly, and to include
for example symbolic links in case the file provides completions
for more than one command. The other one which is present for
backwards compatibility reasons is 'compatdir' (get it with
"pkg-config --variable=compatdir bash-completion") from which files
are loaded when bash_completion is loaded.
For packages using GNU autotools the installation can be handled
for example like this in configure.ac:
PKG_CHECK_VAR(bashcompdir, [bash-completion], [completionsdir], ,
bashcompdir="${sysconfdir}/bash_completion.d")
AC_SUBST(bashcompdir)
...accompanied by this in Makefile.am:
bashcompdir = @bashcompdir@
dist_bashcomp_DATA = # completion files go here
For cmake we ship the bash-completion-config.cmake and
bash-completion-config-version.cmake files. Example usage:
find_package(bash-completion)
if(BASH_COMPLETION_FOUND)
message(STATUS
"Using bash completion dir ${BASH_COMPLETION_COMPLETIONSDIR}")
else()
set (BASH_COMPLETION_COMPLETIONSDIR "/etc/bash_completion.d")
message (STATUS
"Using fallback bash completion dir ${BASH_COMPLETION_COMPLETIONSDIR}")
endif()
install(FILES your-completion-file DESTINATION
${BASH_COMPLETION_COMPLETIONSDIR})For backwards compatibility it is still possible to put it into ~/.bash_completion or /etc/bash_completion.d/.
Tip: To make tab completion more handsome put the following into either /etc/inputrc or ~/.inputrc:
set show-all-if-ambiguous onThis will allow single tab completion as opposed to requiring a double tab.
set page-completions offThis turns off the use of the internal pager when returning long completion lists.
ip[6]tables [TAB] to get you started.
The environment variable _IPT_OPT_STYLE controls wether only long style options should be shown, or long and short style options. Setting it to 'long' (the default) will show only long style options, while any other value will result in both to be offered for completion.
The environment variable _IPT_OPTS_ON_START controls what options are shown at the beginning. Setting it to 'actions' will list only actions (-A,-I, etc.) and -t, -m, -g, -j, -h, -v, -w (respectively the long forms if requested). Any other value will show all options at start (the default).
Generally typing -[TAB] starts option completion. If the variable _IPT_OPT_STYLE is not set to 'long', then using a single dash (-) will show the short version of the main options. If the current context also provides options of a match or target, they will be shown with a double-dash (--) and therefore are easy to distinguish from each other.
Typing --[TAB] will show only the long form of the available options.
Type [TAB] to complete on anything available at the current context, i.e interface-, host-, port-, set-names, etc,.
Available targets (includes builtin and user-defined chains) and matches are selected by table. The default table is 'filter'.
Also some targets or matches are not shown if it can be predicted by the protocol, that the combination is not valid.
To complete named port ranges, enter the : (colon) after the first completed service (port) name, hit [TAB] again to start completion on the second named port. The list of services will start from the offset+1 of the first part of the range expression. No matter if you specified the first part as a numeric value or a name from /etc/services.
Tip: To reduce the amount of services listed, specify a protocol before.Numeric protocol specifications are recognized for the following protocols (their options are loaded for completion afterwards):
icmp 1
tcp 6
udp 17
dccp 33
esp 50
ah 51
ipcomp 108
sctp 132
mh 135The environment variable HOSTFILE controls how hostname completion is performed. Taking the description from the bash man-page:
Contains the name of a file in the same format as /etc/hosts that
should be read when the shell needs to complete a hostname.
The list of possible hostname completions may be changed while the shell is running
the next time hostname completion is attempted after the value is changed,
bash adds the contents of the new file to the existing list.
If HOSTFILE is set, but has no value, or does not name a readable file, bash
attempts to read /etc/hosts to obtain the list of possible hostname completions.
When HOSTFILE is unset, the hostname list is cleared.If the bash-completion package is available hostname completion is extended the following way (description from bash-completion source):
Helper function for completing _known_hosts.
This function performs host completion based on ssh config and known_hosts
files, as well as hostnames reported by avahi-browse if
COMP_KNOWN_HOSTS_WITH_AVAHI is set to a non-empty value.
Also hosts from HOSTFILE (compgen -A hostname) are added, unless
COMP_KNOWN_HOSTS_WITH_HOSTFILE is set to an empty value.Also if the bash-completion package is not available, COMP_KNOWN_HOSTS_WITH_HOSTFILE is recognized the same way.
If the environment variable _IPT_COMP_IP_LOCAL is set to a non-empty value, ip addresses of the local system are added to the list of possible completions.
If the environment variable _IPT_COMP_NETWORKS is set to a non-empty value, additionally network addresses are taken from /etc/networks and get added to the list of possible completions.
Also a list of ip addresses can be supplied using the environment variable _IPT_IPLIST_FILE. Which should point to a file containing an ip address per line. They can be ipv4 and/or ipv6. If iptables is invoked, only ipv4 addresses are shown, if ip6tables is invoked only ipv6 addresses are shown.
The iprange match only completes on addresses taken from the file specified with _IPT_IPLIST_FILE.
Mac addresses are retrieved depending on the value of the environment variable _IPT_MAC_COMPL_MODE.
If it is set to 'file', the variable _IPT_MACLIST_FILE is queried for a filename,
which contains a list of mac addresses.
The file should contain one mac address per line.
Empty lines and comments (also after the address) are supported.
Setting it to 'system', mac addresses are fetched from arp cache,
/etc/ethers and the output of ip link show.
Setting it to 'both' (the default, if unset), both methods are used.
If _IPT_MAC_COMPL_MODE has any other value, no mac address completion is performed.
If a comma separated list is to be completed (i.e. state match), no space will be appended to the currently completed word. The cursor will be at the end of the current word. Hit [TAB] and the comma will be appended. Hit [TAB] again to see the possible completions.
To retrieve the list of genres for the osf match the environment variable _IPT_OSF_PF_OS has to point to the pf.os file.
If the environment variable _IPT_VALIDATE_INPUT is defined and set to a non empty value validation of users input is enabled. Thus completion will stop, if an invalid input value is detected.
If the environment variable _DEBUG_NF_COMPLETION is defined (any value) debugging information is displayed.
In case an iptables extension (match or target) is not available on you system and you do not want it to show up for completion, you should remove or comment out the definition of that extension in either 'arr_matches' or 'arr_targets'.
bash v4+ is required.
Tested with iptables v1.4.21 kernel 3.12 on debian squeeze. Tested with iptables v1.6 kernel 3.16 on debian jessie.
Compatibility for future iptables versions cannot be promised, as new options may appear, which of course are currently unpredictable. Old iptables version, which do not have the -S (--list-rules) option are not supported.
The bash-completion (v2.0+) package is highly recommended, though not mandatory.
http://bash-completion.alioth.debian.org/
Some things might not be that reliable or feature rich without it. Also the colon (if there) is removed from COMP_WORDBREAKS. This alteration is globally, which might affect other completions, if they do not take care of it themselves.
The iproute program (ip) is needed to display information about the local system.
Other programs used are:
https://github.com/AllKind/iptables-bash_completion
https://sourceforge.net/projects/ipt-bashcompl/
Please report bugs! Either through sf.net, or email.