This script connect to a list of Avaya switches for initiating a backup command to a TFTP server. It use Telnet protocol and the login should be the same all on switches that the script will go. It require an TFTP server where the backups will be saved
You need to set few variables :
tftp_server : IP of tftp server where the backups will be saved
timeout : time in seconds where we considering that there is a timeout. Be careful to not put too little value, TFTP backup from a switch can take over a minute (the generation time of released file)
log_file : name of output file for script
hosts_file : name of file where they are IP address of Avaya switches
telnet_port : Obvious parameters =)You need to have a file where they are all switches's IP. He must to be in the same directory with the script. Example of input file :
Switch1 :
192.168.1.20
Switch2 :
192.168.1.21The script verifie that the IP address is valid. There is no problem if the file have few texts BUT a line that contains an IP address must only contain it.
The script generate a file named that contains the results of all tests for all the hots. Example of result file :
18/08/2016 11:30:07 192.168.1.20 switch1 : Succesful
18/08/2016 11:31:24 192.168.1.21 switch2 : Failure - connection refused
18/08/2016 11:31:25 : End of script