Construction?

[Alex037]

Hello, could you please share an image, render, skp of the finished model (with details). I started building this frame, and I saw that the files are updated days ago. I am using files from FEB directory. The frame itself is OK, but I am having issues with the heatbed. It seems that there is a difference that will prevent the assembled heatbed to be fit through the rods. The difference is about 3mm.

I'd appreciate any response on this, and I'd love to see it finished (with printed parts). For half of them, I cannot figure them out.

Thanks in advance

[AlvaroRey]

I send you an STEP in order to you to check, but I make 50 frames from older version and I dont Have problems, most of the files, for example the first piece you show me, I didn't modify the original one, its just the original, With the bed its similar I just modify the original desing.

https://drive.google.com/open?id=0BxUhvFbuwEAZV0kyVThDcDNMTU0

In the other hand I sell 50 frames of this one, and nobody complains about measures, or troubles to assembly it.

And Just recheck My 3d models, and the distance its correct in both pieces 170mm

I got also a comment in github that said that its not posible to build, but as I said a build a lot of them

Best Regards, I hope this info was helpfull

2016-09-28 18:30 GMT+02:00 Alex037 notifications@github.com:

Hello, could you please share an image, render, skp of the finished model (with details). I started building this frame, and I saw that the files are updated days ago. I am using files from FEB directory. The frame itself is OK, but I am having issues with the heatbed. It seems that there is a difference that will prevent the assembled heatbed to be fit through the rods. The difference is about 3mm.

I'd appreciate any response on this, and I'd love to see it finished (with printed parts). For half of them, I cannot figure them out.

Thanks in advance

[image: image-0-02-05-27a4e4d94bf209083a72fce7f7879d39c11fa2b7765e78019117d425866cba9a-v] https://cloud.githubusercontent.com/assets/7689836/18922588/91ff4b16-85a9-11e6-9ca1-7e005a9f2ef8.jpg [image: image-0-02-05-699aa025cbd3a4b0fbee28fd25848e230405a9e036b48fac0a460196f7ba43c7-v] https://cloud.githubusercontent.com/assets/7689836/18922589/922a205c-85a9-11e6-91f1-5cb6200d23f6.jpg

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/AlvaroRey/P3Steel_V4_20x30/issues/3, or mute the thread https://github.com/notifications/unsubscribe-auth/ALYqVFB2FtJPkqBqqX-WvEyO0ooZBjUbks5qupY7gaJpZM4KJCTN .

Álvaro Rey. alvaro.rey.rdz@gmail.com www.makergal.es Telf- 652 357 620

[Alex037]

Many thanks for your fast reply. I will look into it immediately and see what is happening. I will get back to you as soon as possible.

[Alex037]

Well, I did compare it to the original files from FEB and the distance is 167mm. Nevermind, I guess I will rework the two parts that hold the rods to fit them to 170mm.

Furthermore, I did found inaccuracies in parts that hold step motor for Z-axis. This is also related to FEB files, so maybe this is resolved already.

Could you please share several images of the completed printer with the printed STL parts attached? I'd like to see it and to figure out what is going where.

Thanks in advance.

[AlvaroRey]

if you go to my website www.makergal.es , in the very bottom you will find a button call Descargas. You will open a dropbox folder, inside you have in the i3steel v4 a constructiobn manual

2016-09-28 22:14 GMT+02:00 Alex037 notifications@github.com:

Well, I did compare it to the original files from FEB and the distance is 167mm. Nevermind, I guess I will rework the two parts that hold the rods to fit them to 170mm. Could you please share several images of the completed printer with the printed STL parts attached? I'd like to see it and to figure out what is going where.

Thanks in advance.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/AlvaroRey/P3Steel_V4_20x30/issues/3#issuecomment-250286117, or mute the thread https://github.com/notifications/unsubscribe-auth/ALYqVLYhBTjtyHtVtlqiosZKOhboZqRpks5qusqwgaJpZM4KJCTN .

Álvaro Rey. alvaro.rey.rdz@gmail.com www.makergal.es Telf- 652 357 620

[Alex037]

Excellent. That will do it. Thank you very much.

[AlvaroRey]

your welcome, if you assembly one plase my twitter is @makergal3d ;)

El 29 sept. 2016 9:09, "Alex037" notifications@github.com escribió:

Excellent. That will do it. Thank you very much.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/AlvaroRey/P3Steel_V4_20x30/issues/3#issuecomment-250388125, or mute the thread https://github.com/notifications/unsubscribe-auth/ALYqVBwte5gb2-UapKa-FtnsBm3kRfTGks5qu2QygaJpZM4KJCTN .

[Alex037]

Will do. I will inform you about the progress soon, this one is done with chromed steel.

[AlvaroRey]

Ok thanks if you have any doubt, you know where am I