P3Steel_V4_20x30
Version 4.0 (By Alvaro Rey and Daniel Torres) From P3steel by irobri with the listed changes:
- The extruder no longer hits the Z axis top bracket
- Y axis belt tensioner ( that may be placed printed or metallic )
- Weight reduction cutting as much material as possible
- Holes to bolt the PSU to the frame
- Electronics as high as possible so that the LCD cables are well hidden
- Holes in the top bracket of the Z axis to position bearing
- Holes in the top bracket of the Z axis to place spool holder
- Axis movable to lose the least footprint as posible
- Y axis uses 2020 profile, less pieces, more easy to install, less wieght, less price
- Y axis bed it's suitable to install 20x20 heated beds or 20x30 heated beds
- The hole for the motor connector has been enlarged, allowing installation of engines below 70 OZ
- Bed with option for 3 or 4 bearings
- Bed with choice of 4 or 3 leveling points
- Holes for Zip ties added to the main frame
- The Y-Axis rods have been changed, now uses 10mm rods and LM10UU lineal Bearings. We recomended to use aluminum beds for Y axis.
- We test aluminum frame too in 3mm. It works just the same
- 20x30 Frame - the Y-axis 10mm smooth rods should now be 510mm long