Automated Filament Changer (AFC) Klipper Add-on

This Klipper plugin is for use on the Box Turtle Filament Changer. The Box Turtle is currently in an open beta. More information can be found here

Installation

To install this plugin, you should have the following pre-requisites installed:

1) Klipper 2) Moonraker 3) WebUI (Mainsail or Fluidd)

To install this plugin, you can use the following commands from the users home directory:

cd ~
git clone https://github.com/ArmoredTurtle/AFC-Klipper-Add-On.git
cd AFC-Klipper-Add-On
./install-afc.sh

Configuration (Automated)

The install-afc.sh script will automatically install the majority of the plugin for you.

Prior to starting Klipper, please review the configuration located at ~/printer_data/config/AFC/AFC_Hardware.cfg and ensure all pins are correct for your specific hardware.

Additionally, review the following files for any changes that may be required:

1) ~/printer_data/config/AFC/AFC.cfg 2) ~/printer_data/config/AFC/AFC_Macro_Vars.cfg

Installation & Configuration (Manual)

To manually install and configure the plugin, you can use the following commands:

cd ~
git clone https://github.com/ArmoredTurtle/AFC-Klipper-Add-On.git
cd AFC-Klipper-Add-On
ln -sf ~/AFC-Klipper-Add-On/extras/*.py ~/klipper/klippy/extras/
mkdir -p ~/printer_data/config/AFC
cp -R ~/AFC-Klipper-Add-On/config/* ~/printer_data/config/AFC/

Next, please copy the appropriate AFC_Hardware.cfg template file from ~/AFC-Klipper-Add-On/templates to ~/printer_data/config/AFC and modify the file to match your hardware configuration. Ensure you rename the file properly based on the selected board type to AFC_Hardware.cfg.

Finally, review and update the following files as needed for your configuration.

1) ~/printer_data/config/AFC/AFC.cfg 2) ~/printer_data/config/AFC/AFC_Macro_Vars.cfg 3) ~/printer_data/config/AFC/AFC_Hardware.cfg

Buffer configuration - Manual

If you are using a buffer such as the Turtleneck, Turtleneck v2 or Annex Belay, and you installed the software manually, you may need to make a couple of additional changes.

You should add the following block to your AFC_Hardware.cfg file based on the type of buffer you are using.

NOTE The pin value should be set to the pin that the buffer is connected to on your board.

Turtleneck

[AFC_buffer TN]
advance_pin:     # set advance pin
trailing_pin:    # set trailing pin
multiplier_high: 1.1   # default 1.1, factor to feed more filament
multiplier_low:  0.9   # default 0.9, factor to feed less filament

Turtleneck v2

[AFC_buffer TN2]
advance_pin: !turtleneck:ADVANCE
trailing_pin: !turtleneck:TRAILING
multiplier_high: 1.1   # default 1.1, factor to feed more filament
multiplier_low:  0.9   # default 0.9, factor to feed less filament
led_index: Buffer_Indicator:1

[AFC_led Buffer_Indicator]
pin: turtleneck:RGB
chain_count: 1
color_order: GRBW
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
initial_WHITE: 0.0

Annex Belay

[AFC_buffer Belay]
pin: mcu:BUFFER
distance: 12
velocity: 1000
accel: 1000

Finally, add Buffer_Name: <TYPE> to your AFC.cfg file. For example, if you are using the Turtleneck v2, you would add the following line:

Buffer_Name: TN2

Additional information about the buffer configuration and operation can be found in the AFC_buffer.md file.

Usage

Usage instructions for the install-afc.sh script can be shown by running:

~/AFC-Klipper-Add-On/install-afc.sh -h

Mandatory Configuration Changes (All)

Prior to operation, the following checks / updates MUST be made to your system:

1) Update the following values in the ~/printer_data/config/AFC/AFC.cfg file:

• tool_stn
• tool_stn_unload
• afc_bowden_length

2) If you are using any of the built-in macros, the variables in the ~/printer_data/config/AFC/AFC_Macro_Vars.cfg file must also be modified to match your configuration for your system.

Failure to update these values can result in damage to your system

Optional Configuration Changes

If you use a Turtleneck v2, you can enable the buffer indicator LED by adding the following lines to your AFC.cfg file:

led_buffer_advancing: 0,0,1,0
led_buffer_trailing: 0,1,0,0
led_buffer_disable: 0,0,0,0.25

Troubleshooting

Debug information about the respooler system can be found by visiting the following URL in your browser:

{ip address}/printer/objects/query?AFC

Removing Plugin

To remove the plugin, you can use the following commands:

cd ~/AFC-Klipper-Add-On
./install-afc.sh -u

Support

Armored Turtle Configuration / Build Manuals here