Azure Relay Bridge

The Azure Relay Bridge (azbridge) is a simple command line tool that allows creating TCP, UDP, HTTP, and Unix Socket tunnels between any pair of hosts, allowing to traverse NATs and Firewalls without requiring VPNs, only using outbound HTTPS (443) Internet connectivity from either host. Neither of those needs to be running in Azure; the Azure Relay helps facilitating the connection.

Why would you want to use this? Here are a few examples:

• You have a database server or a web service somewhere in your datacenter that you need to reach from a cloud application, but it's too difficult or too expensive to set up a VPN bridge between the two.
• You have a service running in a Kubernetes cluster that you need to reach from a client application, but you don't want to expose it via an Ingress controller.
• You are developing a cloud-hosted application that needs to reach a service running on your local machine for testing purposes and you don't control your local machine's network. (You can literally bridge back into your machine sitting at a coffee shop table or on airplane WiFi.)
• Users install your software/devices into networks that you don't have any control over or that don't have stable IP addresses or are hidden behind an ISP's NAT, but you still need ad-hoc access (think vending machines at fuel stations).

Using this tool requires a Microsoft Azure subscription and an Azure Relay namespace. Active Azure Relay ("Hybrid Connections") listeners are charged hourly. Namespaces and relays are not charged while not in use; please review the pricing FAQ.

NOTE: Azure Relay is a fully supported cloud service that has been around for well over a decade, but this azbridge is not covered by Azure product support. The underlying client SDK is fully covered by product support. Therefore you can ask for Relay service and SDK product support as if this was your own code, but you can't demand fixes in this code under the support SLA. Issues that arise from the code in this repo must be filed here and there is no guaranteed reaction time for addressing any such issues. That said, the tool is used by several teams within Microsoft and maintained by the Azure Relay team.

This README document illustrates some simple usage scenarios. For further details, including installation instructions, please read the Installation document. The various configuration options are detailed even further in the Config document.

Installation

See the Installation document for installation instructions for Windows, Linux, MacOS and Docker.

Command Line Arguments Quick Reference

The azbridge command line is structured as follows:

azbridge [options] [forwarding rules]

When no shared access policy is specified either in the connection string or via the -K and -k options, the tool will use the "default Azure credentials" method just like the az CLI tool, meaning that it will automatically pick up the current user's Azure CLI login context. That is the preferred way to use the tool, as it allows for seamless integration with Entra ID and is the most secure way to authenticate with Azure Relay.The examples in this document show that usage, only referring to the Relay service with the -e option.

Forwarding rules are specified as shown in the following table. Hereby, a "local forwarder" is a listener that is bound to a local port and forwards to a relay, and a "remote forwarder" is a listener that is bound to a relay and forwards to a local port. A "remote HTTP forwarder" is a listener that is bound to a relay and forwards to a local HTTP(S) endpoint, with the relay providing the HTTPS endpoint; the bridge thus acts as a reverse proxy.

Whereby:

• hostname is the DNS name or IP address of the local binding address (-L) or the remote target host (-T, -H)
• port is the TCP port number
• port_name is an optional logical port name that allows multiplexing multiple connections over a single relay. This must be http or https for the -H option.
• relay_name is the name of the Hybrid Connection relay in the Azure Relay namespace

The Config explains the options in more detail.

You can specify multiple forwarding rules on the command line, and you can also use a configuration file to specify them. The configuration file can also contain additional options that are not specified on the command line.

Basic Scenario

            Private Network A│          │Private Network B
                             │          │
                             │          │
                             │          │
                   TCP:16161 │          │                    TCP:16161
┌──────────┐      ┌────────┐ │          │   ┌────────┐    ┌────────────┐
│          │      │        │ │          │   │        │    │            │
│  Client  ├──────►azbridge├─┼──────┐ ┌─┼───►azbridge├────► Database   │
│          │      │        │ │      │ │ │   │        │    │            │
└──────────┘      └────────┘        │ │     └────────┘    └────────────┘
                                 ┌──▼─┴───┐
                                 │   db   │
                                 │        │
                                 │        │
                                 └────────┘
                                 Azure Relay
                                  Namespace

azbridge \                                 azbridge \
  -L 16161:db \                               -T db:16161 \
  -e sb://mydemo.servicebus.windows.net       -e sb://mydemo.servicebus.windows.net

If you run a database server somewhere in your own datacenter that you need to reach from a cloud application, azbridge can make that database server securely reachable from the cloud application without you having to make any changes on your on-premises network, as long as azbridge running on or near the database server machine can establish an outbound HTTPS/WebSocket connection to the Azure Relay namespace.

In the example above, there's a bridge running on the same machine as the client, listening on local TCP port 16161 and binding that port to the "db" Hybrid Connection relay on the "mydemo" namespace with the -Loption.

On the database machine, the bridge is bound in the reverse, mapping "db" to the local TCP port 16161 as a client connecting to the database with the -T option. All traffic through the bridge is forwarded end-to-end.

Hybrid Connection Setup

The required Azure Relay resource (the Hybrid Connection) can be set up with a few lines of script (showing BASH syntax):

export _NS=mydemo
# create resource group
az group create --name $_NS --location westeurope
# create relay namespace
az relay namespace create -g $_NS --name $_NS
# create the hybrid connection endpoint 'db'
az relay hyco create -g $_NS --namespace-name $_NS --name db
# grant the current user "owner" permission
az role assignment create \
    --assignee $(az ad signed-in-user show --query "id" --output tsv) \
    --role "Azure Relay Owner" \
    --scope $(az relay namespace show -g $_NS --name $_NS --query "id" --output tsv)

In a real deployment, you can authenticate with Entra ID (formerly Azure Active Directory) using the az login command and then use the that security context with the ´azbridge` tool. You can also use an environment credential or managed identities.

If using Entra ID is not an option, you can use the native authentication/authorization scheme of the Azure Relay. You can create specific access rights with an associated token credential for each relay or you can do so globally at the namespace level. The following two script lines create a "listen" and a "send" rule that can be used to either run a listener or a sender on the "db" Hybrid Connection. You could also combine those rights into one rule by specfying --rights Listen Send

az relay hyco authorization-rule create -g mydemo --hybrid-connection-name db \
                                --namespace-name mydemo -n send --rights Send
az relay hyco authorization-rule create -g mydemo --hybrid-connection-name db \
                               --namespace-name mydemo -n listen --rights Listen

The created rule's keys can then be obtained by running

az relay hyco authorization-rule keys list --hybrid-connection-name db \
                               --namespace-name mydemo -g mydemo -n send

The command will return the primary and secondary signing keys and connection strings:

{
  "keyName": "send",
  "primaryConnectionString": "Endpoint=sb://mydemo.servicebus.windows.net/;SharedAccessKeyName=send;SharedAccessKey={base64 key};EntityPath=db",
  "primaryKey": "{base64 key}",
  "secondaryConnectionString": "Endpoint=sb://mydemo.servicebus.windows.net/;SharedAccessKeyName=send;SharedAccessKey={base64 key};EntityPath=db",
  "secondaryKey": "{base64 key}"
}

You can either use a connection string with the azbridge -x "{connection string}" option and omit the -e endpoint option, or you can specify the name of the rule with -K and the value of the key with -k. Specifying an authorization rule skips the Entra ID authentication.

Hostnames and Addresses

For most scenarios involving TLS, it is important for the hostnames to match the subject name of the presented certificates during the TLS handshake.

When the bridge is used on the client side, you can configure DNS names of the target services in the local hosts file, picking a unique IPv4 address out of the 127.x.x.x range for each service, and then configuring a local forwarder for the respective target address.

It's not widely understood (oddly) that the 127.x.x.x network is fully available for local endpoints, meaning you can bind a TCP port 443 listener simultaneously to 127.0.0.2 and 127.0.0.3 without conflicts. On MacOS only, you must explicitly enable those addresses using, for instance, sudo ifconfig lo0 alias 127.0.0.2 up.

Addresses in the 127.x.x.x range can only be reached on that local machine, shielding the client from exposing TCP bridges to others. For instance, for reaching the remote SQL Server sql.corp.example.com, you would add an IP address like 127.1.2.3 to the "hosts" file as 127.1.2.3 sql.corp.example.com, and then use a local forwarder configuration that refers to the 127.1.2.3 address, for example azbridge -L 127.1.2.3:1433:relay.

Any client connections from that machine to sql.corp.example.com will then be redirected to the azbridge exposed endpoint. The machine connected via the remote azbridge which has this actual DNS name on its own network and therefore presents a matching TLS certificate through the tunnel.

To make that easy, the package install in Linux will register two BASH extensions for adding and removing entries from the /etc/hosts file:

• addhost {ipaddress} {name} - adds an IP address with the given hostname to "hosts"
• removehost {name} - removes the entry for the given hostname

On Windows, the installation path includes three scripts:

• Add-Hostnames.ps1 {ipaddress} {name} - adds an IP address with the given hostname to "hosts"
• Remove-Hostnames.ps1 {name} - removes the entry for the given hostname
• Get-Hostnames.ps - lists all hostnames

All these scripts must be run with admin privileges (sudo on Linux) because the hosts file is protected.

You can obviously also bind to a private network address of the host on which azbridge runs, like azbridge -L 192.168.0.6:1433:relay, and enter that address into the private network's DNS. By default, the bridge will not allow connections from remote hosts to the local listeners, but you can enable that with the -g option.

The remote forwarder end of the azbridge tunnel in the above example is configured as -T db:16161, which forwards to TCP port 16161 on the local machine.

            Private Network A│          │Private Network B
                             │          │
                             │          │
                   127.0.0.8 │          │                 sql.corp.example.com
                   TCP:16161 │          │               │     TCP:16161
┌──────────┐      ┌────────┐ │          │   ┌────────┐  │  ┌────────────┐
│          │      │        │ │          │   │        │  │  │            │
│  Client  ├──────►azbridge├─┼──────┐ ┌─┼───►azbridge├──│──► Database   │
│          │      │        │ │      │ │ │   │        │  │  │            │
└──────────┘      └────────┘        │ │     └────────┘  │  └────────────┘
                                 ┌──▼─┴───┐             │
                                 │   db   │
                                 │        │
                                 │        │
                                 └────────┘

azbridge \                                  azbridge \
  -L sql.corp.example.com:16161:db            -T db:sql.corp.example.com:16161

(hosts file: sql.corp.example.com 127.0.0.8)

The bridge's remote forwarders can also be configured to point to external hosts within the bridge's network scope, specifiying their hostname in the binding expression, like -T db:somewhere.corp.example.com:16161.

Multiplexing

Occasionally, you will need to connect to multiple targets behind the same network boundary. azbridge can realize this using a single listener (which saves you money). The established connections remain completely independent.

            Private Network A│          │Private Network B
                             │          │                    sql1.corp.example.com
                             │          │                        TCP:16161
                             │          │                      ┌────────────┐
                             │          │               │      │            │
┌──────────┐      ┌────────┐ │          │   ┌────────┐  │  ┌───► Database   │
│          │      │        │ │          │   │        │  │  │   │            │
│  Client  ├──────►azbridge├─┼──────┐ ┌─┼───►azbridge├──│──┤   └────────────┘
│          │      │        │ │      │ │ │   │        │  │  │   ┌────────────┐
└──────────┘      └────────┘        │ │     └────────┘  │  │   │            │
                                 ┌──▼─┴───┐             │  └───► Database   │
                                 │   db   │                    │            │
                                 │        │                    └────────────┘
                                 │        │                      TCP:16161
                                 └────────┘                  sql2.corp.example.com

hosts file:
   sql1.corp.example.com 127.0.0.8
   sql2.corp.example.com 127.0.0.9

To multiplex connections to multiple targets, you can use "logical ports" with azbridge. Logical ports are used to distinguish connections through the Relay tunnel and they are specified on the command line.

The command azbridge -L "127.0.0.8:16161/sql1;127.0.0.9:16161/sql2:db" -e [...] binds a listener on 127.0.0.8:16161 to logical port "sql1" and a listener on 127.0.0.9:16161 to logical port "sql2"; both listeners are bound to the Hybrid Connection db specified after the last :.

On the remote side, and given the scenario above, the targets are bound with the command azbridge -T db:sql1/sql1.corp.example.com:16161;sql2/sql2.corp.example.com:16161.

Logical ports are construct of azbridge and there's no limit on how many you can have.

HTTP Scenario

   Cloud App Network │      │Restaurant Network
                     │      │
                     │      │
                     │      │
                     │      │                    HTTPS:443
┌─────────┐          │      │   ┌────────┐    ┌────────────┐
│         │ HTTPS:443│      │   │        │    │ "La Tavola"│
│ Cloud   ├──────────┼──┐ ┌─┼───►azbridge├────► Restaurant │
│  App    │          │  │ │ │   │        │    │ Order Sys  │
└─────────┘             │ │     └────────┘    └────────────┘
                     ┌──▼─┴───┐
                     │latavola│
                     │        │
                     │        │
                     └────────┘
                     Azure Relay
                      Namespace

                                 azbridge \
                                   -H latavola:https/443 \
                                   -e sb://mydemo.servicebus.windows.net

If you run an order management app inside of a restaurant using a common DSL or Cable connection that does not have a stable IP address and is firewalled, but you need to be able to reach that app from a web-based portal or even from a client device attached to a public wireless network to submit orders, azbridge can help, either in the same way as shown above or as an HTTP proxy that only needs to run on one side.

The diagram shows azbridge functioning as a reverse proxy for HTTPS, making an HTTP or HTTPS endpoint behind a firewall or even inside a container reachable via the Azure Relay namespace's network and DNS integration and secured with an optional (on-by-default) access control rule protecting the endpoint.

The azbridge only needs to be run on the receiver side since the Azure Relay provides the HTTPS endpoint. Similar to the prior scenario, we need to set up and configure Hybrid Connection, which is named "latavola" (name of the assumed restaurant). The azbridge -H command then binds to that relay with an HTTP reverse proxy, which forwards incoming requests to the HTTPS listener on the local target port 443. All HTTP headers, including the "Authorization" header, are forwarded end-to-end.

The client in this example will connect to https://mydemo.servicebus.windows.net/latavola. By default, the endpoint requires an extra layer of authorization at the relay, similar to HTTP proxy authentication. The required parameters/headers are described in the protocol guide, and the token model is described in the authorization documentation.

You can turn off this protection at the relay endpoint and only rely on end-to-end authorization, even though it's not recommended to expose services behind firewalls that are not designed to be used as public endpoints in this way.

az relay hyco update -g mydemo --namespace-name mydemo --name latavola \
              --requires-client-authorization false

The command azbridge -H latavola:https/443 -e sb://mydemo.servicebus.windows.net will bind the external address to https://mydemo.servicebus.windows.net/latavola and will forward arriving requests to https://localhost:443

Kubernetes scenario

                        │       │  Kubernetes Pod
┌─────────┐             │       │
│  Admin  │  HTTPS:443  │       │
│  Tool A ├─────────────┼───┐   │
│         │             │   │   │
└─────────┘             │   │   │   ┌─────────┬───────────┐
             TCP:17171  │   │   │   │         │           │
┌─────────┐ ┌────────┐  │   │   │   │         │ ┌───────┐ │
│ Admin   │ │        │  │   │   │   │    ┌────┼─►Svc A  │ │
│ Tool B  ├─►azbridge├──┼───►   │   │    │    │ └───────┘ │
│         │ │        │  │   │ ┌─┼───►azbridge │           │
└─────────┘ └────────┘  │   │ │ │   │    │    │ ┌───────┐ │
                            │ │     │    └────┼─►Svc B  │ │
                         ┌──▼─┴───┐ │         │ └───────┘ │
                         │ myctr  │ │sidecar  │           │
                         │        │ └─────────┴───────────┘
                         │        │
                         └────────┘
                         Azure Relay
                          Namespace

Using azbridge in a Kubernetes sidecar container, you can reach APIs and services running inside of containers in a cluster without having them exposed via an Ingress controller.

See the Installation document for further details.